lldp med location-id civic-address
lldp med location-id civic-address
refers-to
reference
country
country-code
[
elem
CA-type
value
[
elem
CA-type
value
]
... ]
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp med location-id civic-address
refers-to
reference
country
country-code
[
elem
CA-type
value
[
elem
CA-type
value
]
... ]
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
An LLDP-MED civic address is not configured.
- refers-to reference
- Specifies the location that the entry refers to. Specify one of the following:
client,
dhcp-server, or
network-element.
Note: The dhcp-server or network-element keywords should be used only if it is known that the endpoint is in close physical proximity to the DHCP server or network element.
- country country-code
- Specifies a two-letter ISO 3166 country code in capital ASCII letters as follows:
- elem CA-type
- Specifies the civic address element. This a value from 0 to 255 that describes the civic address element. Refer to the usage guidelines.
Global configuration mode
If the value of an element contains one or more spaces, use double quotation marks (") at the beginning and end of the string. For example, elem 3 "Santa Clara".
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.
The
no form of the command removes the configuration.
Elements Used With a Civic Address
The
no form of the command removes the LLDP-MED civic address.