neighbor next-hop-self
Causes the device to list itself as the next hop in updates that are sent to the specified
neighbor.
Syntax
neighbor
{
ip-address
|
ipv6-address
|
peer-group-name
}
next-hop-self
[
always
]
no neighbor
{
ip-address
|
ipv6-address
|
peer-group-name
}
next-hop-self
[
always
]
Parameters
Modes
BGP configuration mode
BGP address-family IPv4 unicast VRF configuration mode
BGP address-family IPv6 unicast VRF configuration mode
Usage Guidelines
Examples
The following example causes all updates destined for the neighbor with the IP address 10.11.12.13 to advertise this device as the next hop.
device# configure terminal device(config)# router bgp device(config-bgp-router)# neighbor 10.11.12.13 next-hop-self
The following example, for the VRF instance "red," causes all updates destined for the neighbor with the IPv6 address 2001:2018:8192::125 to advertise this device as the next hop.
device# configure terminal device(config)# router bgp device(config-bgp-router)# address-family ipv6 unicast vrf red device(config-bgp-ipv6u-vrf)# neighbor 10.11.12.13 next-hop-self
History
| Release version | Command history |
|---|---|
| 08.0.30 | Support was added for the BGP address-family IPv6 unicast VRF configuration mode. |