virtual-port

Configures the HTTP port number to facilitate HTTP services for the clients in external Web Authentication.
Syntax
virtual-port http-port-number
no virtual-port http-port-number
Command Default

A virtual port number is not configured.

Parameters
http-port-number

Specifies the port number. By default, HTTPS is used and the default port number for HTTPS is 443.

Modes

Captive portal configuration mode

Usage Guidelines

The protocol configured in the Captive Portal profile must be the same as the protocol configured as part of web management access using the web-management command.

You can also specify HTTP mode and the default port number for HTTP is 80.

The no form of the command removes the virtual port number configuration.

Examples

The following example configures the virtual port number used by HTTP. 

device(config)# captive-portal cp_ruckus
device(config-cp-cp_ruckus)# virtual-port 80
History
Release version Command history
08.0.40 This command was introduced.
08.0.30j This command was added to FastIron 08.0.30j.
Parent topic: Commands Si - Z