openflow controller

Connects devices to openflow controller connections.
Syntax
openflow controller ip-address
openflow controller passive no-ssl
no openflow controller ip-address
no openflow controller passive no-ssl
Command Default

The openflow controller is not enabled.

Parameters
ip-address
Specifies the IPv4 address.
Modes

Global configuration mode

Usage Guidelines

The no form of the command disables the openflow controller ip-address and openflow controller passive no-ssl.

Examples

The following example connects to an openflow controller in active mode. 

device# configure terminal
device(config)# openflow controller ip-address 10.2.3.4
device(config)# openflow controller ip-address 10.2.3.4 no-ssl port 6635

The following example connects to an openflow controller in passive mode. 

device# configure terminal
device(config)# openflow controller passive no-ssl
device(config)# openflow controller passive no-ssl ip-address 10.2.3.6

Note: Passive mode connections are intended for testing environments and not recommended for production environments.

History

Release

Command History

08.0.30

This command was introduced.

Parent topic: Commands O, P, Q, R, and Sa through Sh