show fdp neighbors
Displays the Cisco neighbors about which the Ruckus ICX device has learned from Cisco
Discovery Protocol (CDP) packets.
Parameters
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Interface configuration mode
Examples
The following is sample output from the
show fdp neighbors command.
device# show fdp neighbors detail Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater (*) indicates a Cisco device Device ID Local Int Holdtm Capability Platform Port ID -------------- ------------ ------ ---------- ----------- ------------- (*)Router Eth 1/1/1 124 R cisco RSP4 FastEthernet5/0/0
The following is sample output from the
show fdp neighbors
detail command.
device# show fdp neighbors detail Device ID: Router Entry address(es): IP address: 10.95.6.143 Platform: cisco RSP4, Capabilities: Router Interface: Eth 1/1/1, Port ID (outgoing port): FastEthernet5/0/0 Holdtime : 150 seconds Version : Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Thu 19-Aug-99 04:12 by xxxxxx
The following is sample output from the
show fdp neighbors
ethernet command.
device# show fdp neighbors ethernet 1/1/5 Device ID: Router Entry address(es): IP address: 10.95.6.143 Platform: cisco RSP4, Capabilities: Router Interface: Eth 1/1/5, Port ID (outgoing port): FastEthernet5/0/0 Holdtime : 127 seconds Version : Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Thu 19-Aug-99 04:12 by xxxxxx