ip-address
A virtual IP address is not configured for a VRRP or VRRP-E instance.
VRID interface configuration mode
For VRRP instances, the IP address used for the virtual router must be configured on the device assigned to be the initial VRRP owner device. The same IP address cannot be used on any other VRRP device.
For VRRP-E instances, the IP address used for the virtual router must not be configured on any other device.
The
no form of this command removes the virtual router IP address.
The following example configures a virtual IP address for VRID 1 when VRRP is implemented. In this example, the device is configured as the VRRP owner device.
device# configure terminal device(config)# router vrrp device(config)# interface ethernet 1/1/6 device(config-if-e1000-1/1/6)# ip address 10.53.5.1/24 device(config-if-e1000-1/1/6)# ip vrrp vrid 1 device(config-if-e1000-1/1/6-vrid-1)# owner device(config-if-e1000-1/1/6-vrid-1)# ip-address 10.53.5.1 device(config-if-e1000-1/1/6-vrid-1)# activate VRRP router 1 for this interface is activating
The following example configures a virtual IP address for VRID 2 when VRRP-E is implemented. In this example, the device is configured as a VRRP backup device and the highest priority device will become the master VRRP device.
device# configure terminal device(config)# router vrrp-extended device(config-vrrpe-router)# interface ethernet 1/1/5 device(config-if-e1000-1/1/5)# ip address 10.53.5.3/24 device(config-if-e1000-1/1/5)# ip vrrp-extended vrid 2 device(config-if-e1000-1/1/5-vrid-2)# backup priority 110 device(config-if-e1000-1/1/5-vrid-2)# version 2 device(config-if-e1000-1/1/5-vrid-2)# ip-address 10.53.5.254 device(config-if-e1000-1/1/5-vrid-2)# activate VRRP router 2 for this interface is activating