lldp advertise system-capabilities
Advertises the primary functions of the device and indicates whether these primary
functions are enabled.
Syntax
lldp advertise
system-capabilities
ports
{ all | [
ethernet unit/slot/port[ to
unit/slot/port
] ... ] }no lldp advertise
system-capabilities
ports
{ all | [ ethernet unit/slot/port[ to unit/slot/port ] ... ]
}Command Default
The system capabilities are automatically advertised when Link Layer Discovery Protocol (LLDP) is enabled on a global basis.
Parameters
Modes
Global configuration mode
Usage Guidelines
The enabled capabilities are the same as the available capabilities, except that if the global route-only feature is turned on, the bridge capability is not included, since no bridging occurs.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.