show mvrp
Displays Multiple VLAN Registration Protocol (MVRP) information.
Syntax
show mvrp
[
attributes
{
ethernet
unit/slot/port
|
lag
lag-id
|
vlan
vlan-id
}
|
statistics
{
ethernet
unit/slot/port
|
lag
lag-id
}
|
ethernet
unit/slot/port
|
lag
lag-id
]
Parameters
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Interface configuration mode
Examples
The following example shows sample output from the
show mvrp command.
device(config)# show mvrp Total configured mvrp ports : 5 Global Status : Enabled Dynamic VLAN Creation : Enabled Spanning-tree type : Spanning-tree 802.1w MVRP untagged VLAN : 20 Join-timer(in ms) : 200 Leave-timer(in ms) : 1000 Leaveall-timer(in ms) : 10000 MVRP enabled port(s) : ethe 1/1/1 to 1/1/5 MVRP active topology port(s) : ethe 1/1/1 to 1/1/3 ethe 1/1/5
The following example displays MVRP event statistics and packet RX and TX counters.
device(config)# show mvrp statistics Port : 1/1/25 ----------------------------------------------------------------------------- Message type Received Transmitted ----------------------------------------------------------------------------- New 0 0 Join In 4 6 In 0 0 Join Empty 0 0 Empty 0 0 Leave 0 0 Leave-all 0 1 Total PDUs 2 3 -----------------------------------------------------------------------------
The following example displays MVRP details of a specific port.
device(config)# show mvrp ethernet 1/1/25 --------------------------------------------------------------------------- MVRP Status : Enabled Join-timer(in ms) : 200 Leave-timer(in ms) : 1000 Leave-all-timer(in ms) : 10000 P2p : Yes Applicant Mode : Normal-participant --------------------------------------------------------------------------- Registered Vlan(s) : 101 4000 Declared Vlan(s) : 101 4000 Forbidden Vlan(s) :
The following example displays MVRP attributes of a specific port.
device(config)# show mvrp attributes ethernet 1/1/25
Port : 1/1/25 State : Forwarding
-----------------------------------------------------------------------------
VLAN Registrar Registrar Applicant
State Mgmt State
-----------------------------------------------------------------------------
101 IN FIXED Quiet Active
4000 IN FIXED Quiet Active
The following example displays MVRP attributes of a specific VLAN.
device(config)# show mvrp attributes vlan 101
-----------------------------------------------------------------------------
PORT VLAN Registrar Registrar Applicant
State Mgmt State
-----------------------------------------------------------------------------
1/1/25 101 IN FIXED Quiet Active
History
| Release version | Command history |
|---|---|
| 08.0.90 | This command was introduced. |
| 08.0.95 | This command was modified to include the type of spanning tree, the MVRP untagged VLAN ID, and the MVRP active topology ports in the output. |