dot1x-mka-enable

Enables MACsec Key Agreement (MKA) capabilities on a licensed device and enters dot1x-mka configuration mode.
Syntax
dot1x-mka-enable
no dot1x-mka-enable
Command Default

No MACsec capability is available.

Modes

Global configuration

Usage Guidelines

MACsec commands are supported only on ICX 7650 and ICX 7850 devices.

The no form of this command disables the MKA and MACsec functionality on all ports. This may require the already authenticated hosts to re-authenticate.

Use the dot1x-mka-enable command to enable MACsec on an already licensed device. Commands may be visible, but they do not work on a non-licensed device.

Examples

The following example enables MACsec capabilities on the device. 

device# config t
device(config)# dot1x-mka-enable
device(config-dot1x-mka)#
History
Release version Command history
08.0.20 This command was introduced.
08.0.30 Support for this command was added on ICX 7450 devices.
08.0.70 MACsec support was added on ICX 7650 devices.
08.0.90 MACsec support was added on ICX 7850 devices.

Related commands:

enable-mka
mka-cfg-group
Parent topic: Commands D through H