`mstp admin-pt2pt-mac`

Creates a point-to-point link between ports to increase the speed of convergence.

Syntax

mstp admin-pt2pt-mac{[ethernetunit/slot/port[tounit/slot/port]... ][laglag-id[tolag-id]... ]}

no mstp admin-pt2pt-mac{[ethernetunit/slot/port[tounit/slot/port]... ][laglag-id[tolag-id]... ]}

Command Default

By default, a point-to-point link is not available between ports.

Parameters

ethernetunit/slot/port[tounit/slot/port]: Configures the specified Ethernet port or port range as one end of a point-to-point link.
laglag-id[tolag-id]: Specifies a LAG or a range of LAGs to serve as one end of a point-to-point link.

Modes

Global configuration mode

Usage Guidelines

The no form of the command removes the point-to-point link on the ports.

You can combine individual Ethernet ports, Ethernet port ranges, LAGs, and LAG ranges in the same command if you wish.

Examples

The following example configures two Ethernet ports as endpoints for point-to-point links.

device(config)# mstp admin-pt2pt-mac ethernet 1/2/5 ethernet 1/4/5

History

Release version	Command history
08.0.61	This command was modified to add LAG ID options.

mstp admin-pt2pt-mac