qos guaranteed-rate

Configure the minimum percentage of a port outbound bandwidth guaranteed to the queues.
Syntax
qos guaranteed-rate ASCII string
no qos guaranteed-rate ASCII string
Command Default

By default, the eight QoS queues on RUCKUS ICX devices receive the minimum guaranteed percentages of a port’s total bandwidth, as shown in the following table. Note that the defaults differ when jumbo frames are enabled.

Default Minimum Bandwidth Percentages on RUCKUS ICX Devices

Queue Default Minimum Percentage of Bandwidth
Without Jumbo Frames With Jumbo Frames
qosp7 75% 44%
qosp6 7% 8%
qosp5 3% 8%
qosp4 3% 8%
qosp3 3% 8%
qosp2 3% 8%
qosp1 3% 8%
qosp0 3% 8%
Modes

Global configuration mode

Usage Guidelines

The bandwidth allocated to each queue is based on the relative weights of the queues. You can change the bandwidth percentages allocated to the queues by changing the queue weights.

Stackable devices that are operating as members of a stack reserve queue 7 for stacking functions.

ICX 8100 and ICX 8200 devices do not support "qos guaranteed-rate" configuration.

Examples

The following example shows how to change the bandwidth percentages for the queues.

device# configure terminal
device(config)# qos guaranteed-rate qosp0 10 qosp1 10 qosp2 15 qosp3 15 qosp4 10 qosp5 10 qosp6 10 qosp7 10 
device(config)# exit
device# write memory
History
Appears this command has been a part of the software since Day 1, engineering couldn't give me a introduction version and the there have not been any changes to this command since then.
Parent topic: Commands O, P, Q, R, and Sa through Sh