owner
owner
[
priority
value
]
[
track-priority
value
]
no owner
[
priority
value
]
[
track-priority
value
]
No virtual routers are designated as the VRRP owner.
VRID interface configuration mode
This command specifies that the device on which it is configured owns the IP address that is associated with the virtual router; making this device the default VRRP master router with its priority set to 255.
This command must be entered before the
ip-address command can be configured for a VRRP virtual router ID (VRID).
The
no form of this command removes the virtual router configuration.
The following example configures the device as the VRRP owner.
device# configure terminal device(config)# router vrrp device(config)# interface ethernet 1/1/6 device(config-if-e1000-1/1/6)# ip address 10.53.5.1/24 device(config-if-e1000-1/1/6)# ip vrrp vrid 1 device(config-if-e1000-1/1/6-vrid-1)# owner device(config-if-e1000-1/1/6-vrid-1)# ip-address 10.53.5.1 device(config-if-e1000-1/1/6-vrid-1)# activate
The following example configures the device as the VRRP owner and sets the track priority to 10.
device# configure terminal device(config)# router vrrp device(config)# interface ethernet 1/1/6 device(config-if-e1000-1/1/6)# ip address 10.53.5.1/24 device(config-if-e1000-1/1/6)# ip vrrp vrid 1 device(config-if-e1000-1/1/6-vrid-1)# owner track-priority 10 device(config-if-e1000-1/1/6-vrid-1)# ip-address 10.53.5.1 device(config-if-e1000-1/1/6-vrid-1)# activate