stack enable

Enables stack configuration on the device. Enter this command on the intended active controller.
Syntax
stack enable
no stack enable
Command Default

Stacking is not enabled on the device.

Modes

Global configuration mode

Stack unit configuration mode

Usage Guidelines

Use the no form of the command to remove stacking capability from the device.

Note: When you use the no stack enable command, the unit can still be called to join an active stack. To prevent this, use the stack disable command instead.

You must remove all configuration information from the port before issuing the stack enable command.

For manual configuration, the stack enable command must be issued on each device in the stack.

Examples

The following example enables stack configuration on the device. 

device# config terminal
device(config)# stack enable
Enable stacking. This unit actively participates in stacking
History
Release version Command history
08.0.00a This command was introduced.
Parent topic: Commands Si - Z