`copy running-config scp`

Uploads a copy of the running configuration file from a FastIron device to an SCP server.

Syntax

copy
                  					running-config scp

{ ipv4-address | ipv4-hostname | ipv6 { ipv6-address | ipv6-hostname } remote-filename }

Parameters

ipv4-address: Specifies the IPV4 address of the SCP server.
ipv4-hostname: Specifies the IP hostname of the SCP server.
ipv6: Specifies the IPV6 address method for SCP file transfer.
ipv6-address: Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
ipv6-hostname: Specifies the IPv6 hostname of the SCP server.
remote-filename: Specifies the name of the file in the SCP server that is going to be uploaded. You can specify up to 127 characters for the filename.

Modes

Privileged EXEC mode

Usage Guidelines

You are prompted for username and password when you configure this command.

Examples

The following example uploads a copy of the running configuration file from an ICX device to an SCP server with the IP address 172.26.51.180.

device# copy running-config scp 172.26.51.180 runconfig

History

Release version	Command history
08.0.20	This command was introduced.
09.0.00	This command was modified. The outgoing-interface, public-key , and remote-port options were deprecated.

copy running-config scp