encapsulation-mode

Specifies the encapsulation mode for an IPsec proposal.
Syntax
encapsulation-mode encapsulation-mode
Command Default

The default encapsulation mode is tunnel mode.

Parameters
encapsulation-mode
Specifies the encapsulation mode. Only tunnel mode is currently supported.
Modes

IPsec proposal configuration mode

Usage Guidelines

Because tunnel mode is configured by default and is the only mode that is currently supported, you do not need to configure the encapsulation mode for an IPsec proposal.

Examples

The following example shows how to configure tunnel mode as the encapsulation mode for an IPsec proposal named ipsec_proposal. 

device(config)# ipsec proposal ipsec_proposal
device(config-ipsec-proposal-ipsec_proposal)# encapsulation-mode tunnel
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Commands D through H