show ipv6 ospf
Displays OSPFv3 information.
Modes
User EXEC mode
Examples
The following example displays sample output from the
show ipv6 ospf
command.
device> show ipv6 ospf OSPFv3 Process number 0 with Router ID 0xc0a862d5(10.168.98.213) Running 0 days 2 hours 55 minutes 36 seconds Number of AS scoped LSAs is 4 Sum of AS scoped LSAs Checksum is 18565 External LSA Limit is 250000 Database Overflow Interval is 10 Database Overflow State is NOT OVERFLOWED Route calculation executed 15 times Pending outgoing LSA count 0 Authentication key rollover interval 300 seconds Number of areas in this router is 3 Router is operating as ABR Router is operating as ASBR, Redistribute: CONNECTED RIP High Priority Message Queue Full count: 0 Graceful restart helper is enabled, strict lsa checking is disabled Nonstop-routing is ENABLED
The following example displays sample output
from the show ipv6 ospf
command including information about the maximum number of LSAs in the LSDB and the
device
configurations for checking the overflow state.
device> show ipv6 ospf OSPFv3 Process number 0 Router ID 2.2.2.2 (0x2020202) Running 0 days 1 hours 39 minutes 8 seconds Sum of AS scoped LSAs Checksum 0 LSDB Limit 40 LSDB Overload Interval 60 seconds LSDB Overload Frequency 36 LSDB Overload Check timer running YES LSDB Overload timer running NO LSDB Overload State NO OVERFLOW External LSA Limit 40 External Database Overflow Interval 600 seconds External LSDB Overflow timer running NO External Database Overflow State NO OVERFLOW Route calculation executed times 3 Pending outgoing LSA count 0 Authentication key rollover interval 300 seconds Number of areas in this router 2 High Priority Message Queue Full count 0 Medium Priority Message Queue Full count 0 BFD is disabled Graceful restart helper enabled Strict lsa checking disabled Nonstop Routing enabled Total Keychain events received 0
History
| Release version | Command history |
|---|---|
| 08.0.95 | This command output was modified to include extra information about the maximum number of link state advertisements in the LSDB and the device configurations for checking the overflow state. |