use-radius-server

Maps a RADIUS server to a port.
Syntax
use-radius-server ip-address
no use-radius-server ip-address
Command Default

The RADIUS server is not mapped to any port.

Parameters
ip-address
The IP address of the RADIUS server.
Modes

Interface configuration mode

Usage Guidelines

Once the RADIUS server is mapped to a port, the port sends the RADIUS request to the configured RADIUS server.

The no form of the command removes the mapping of the RADIUS server to the port.

Examples

The following example shows how to map a RADIUS server to the interface 1/1/3 (port 3). Port 3 sends a RADIUS request to 10.10.10.103 first, because it is the first server mapped to the port. If the request fails, the server will go to 10.10.10.110. 

device(config)# interface ethernet 1/1/3
device(config-if-e1000-1/1/3)# use-radius-server 10.10.10.103
device(config-if-e1000-1/1/3)# use-radius-server 10.10.10.110
Parent topic: Commands Si - Z