lldp enable receive
lldp enable receive
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp enable receive
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
... ]
}
When LLDP is enabled on a global basis, each port on the device is capable of transmitting and receiving LLDP packets.
Global configuration mode
To change the LLDP operating mode to transmit-only mode, disable the receive mode
using the
no lldp enable transmit command.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.
The
no form of the command changes the LLDP operating mode to transmit-only mode if the
device is in both transmit and receive mode, and it disables the LLDP receive-only
operating mode if receive-only mode was enabled.