`redistribute (RIPng)`

Configures RIPng to advertise routes from the specified protocol or connections.

Syntax

redistribute { bgp | connected | ospf | static [ metric value ] }

no redistribute { bgp | connected | ospf | static [ metric value ] }

Command Default

By default, routes from these protocols are not shared between RIPng neighbors.

Parameters

connected: Redistributes directly connected IPv6 network routes.
bgp: Redistributes BGP4+ routes.
ospf: Redistributes OSPFv3 routes.
static: Redistributes IPv6 static routes.
metric: Sets a RIPng route metric to the value specified. When no metric is set, the default metric of one is used.
value: Specifies RIPng route metric as a value from1 through 15.

Modes

RIPng router configuration mode

Usage Guidelines

The no form of the command removes redistribution actions specified in the command.

Examples

The following example configures the RIPng router to redistribute OSPF routes.

device# configure terminal
device(config)# ipv6 router rip
device(config-ripng-router)# redistribute ospf

redistribute (RIPng)