multicast static-group
multicast static-group
ipv4-address
[
count
num
]
{
[
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
[
lag
lag-id
[
to
lag-id
]
... ]
}
no multicast static-group
ipv4-address
[
count
num
]
{
lag
lag-id
[
to
lag-id
]
|
ethernet
unit/slot/port
[
ethernet
unit/slot/port
|
to
unit/slot/port
]
|
management
{
unit/slot/port
|
management-id
}
}
The VLAN cannot forward multicast traffic to ports that do not receive IGMP membership reports.
VLAN configuration mode
A snooping-enabled VLAN cannot forward multicast traffic to ports that do not receive
IGMP membership reports. You can configure the
multicast static-group command to create a static group that applies to specific ports, allowing packets
to be forwarded to them even though they have no client membership reports.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
You can combine individual Ethernet ports, Ethernet port ranges, LAGs, and LAG ranges in the same command if you wish.
The
no form of this command removes the static group from the VLAN.
| Release version | Command history |
|---|---|
| 08.0.61 | This command was modified to include LAG ID options. |