Show Commands

In this section:

1. show 802-1w
   Displays the Rapid Spanning Tree Protocol (RSTP) (802.1W) information of the specified port-based VLAN.
2. show aaa
   Displays information about all TACACS+ and RADIUS servers identified on the device.
3. show access-list all
   Displays access control list (ACL) status information for all named and numbered ACLs.
4. show access-list accounting
   Displays the access control list (ACL) accounting statistics for IPv4 ACLs, IPv6 ACLs, and Layer 2 MAC ACLs.
5. show access-list tcam
   Displays where access control lists (ACLs) are programmed in the Ternary Content Addressable Memory (TCAM). This includes the ACL names, associated features, rule ranges, filter counts, and the interfaces to which the ACLs are bound.
6. show acl-on-arp
   Displays the list of ACLs that are configured to filter ARP requests.
7. show arp
   Displays the Address Resolution Protocol (ARP) table.
8. show authentication acls
   Displays information about currently active user-defined and dynamically applied ACLs.
9. show authentication configuration
   Displays the 802.1X and MAC authentication configuration for the device or the specified interface.
10. show authentication sessions
    Displays details of 802.1X or MAC authentication sessions.
11. show authentication statistics
    Displays authentication statistics for a specified interface.
12. show batch schedule
    Displays the schedule and status of batch execution.
13. show bfd
    Displays Bidirectional Forwarding Detection (BFD) information.
14. show bfd agent
    Displays Bidirectional Forwarding Detection (BFD) agent-related information.
15. show bfd applications
    Displays information about the applications that are registered to Bidirectional Forwarding Detection (BFD).
16. show bfd counters
    Displays Bidirectional Forwarding Detection (BFD) counters.
17. show bfd ha info
    Displays high availability (HA) information from active agents for Bidirectional Forwarding Detection (BFD).
18. show bfd micro-session
    Displays information about micro Bidirectional Forwarding Detection (micro-BFD) sessions.
19. show bfd neighbors
    Displays Bidirectional Forwarding Detection (BFD) neighbor information.
20. show bfd sessions
    Displays information about Bidirectional Forwarding Detection (BFD) sessions.
21. show bfd trace session
    Displays Bidirectional Forwarding Detection (BFD) information session traces.
22. show bfd uc sessions
    Displays Bidirectional Forwarding Detection (BFD) session information for the micro controller.
23. show bfd v6-neighbors
    Displays IPv6 information for Bidirectional Forwarding Detection (BFD) information sessions.
24. show bfd vrf
    Displays Bidirectional Forwarding Detection (BFD) information for specified VRF instances.
25. show boot-monitor
    This CLI displays the current and the recommended boot-monitor version, allowing you to understand the mismatch.
26. show boot-preference
    Displays the boot sequence in the startup configuration and running configuration files.
27. show breakout
    Displays information on 10 Gbps sub-ports broken out from 40 Gbps ports on certain FastIron devices.
28. show cable-diagnostics tdr
    Displays the results of Virtual Cable Test (VCT) Time Domain Reflectometry (TDR) cable diagnostic testing.
29. show cable-signal-error-count
    Displays the cable signal error count for all 2.5G ports.
30. show captive-portal
    Displays the details of the Captive Portal profile configured on the device.
31. show chassis
    Displays chassis information.
32. show cli-command-history
    Displays the history list of CLI commands executed on the device from any console, Telnet, or SSH session.
33. show clock
    Displays the local time, date, and time zone.
34. show cluster
    Displays information about MCT clusters.
35. show configuration
    Displays the configuration data in the startup configuration file.
36. show configuration (SPX)
    Shows the startup configuration in regular switch or router mode, or the PE startup configuration in Provisional-PE or PE mode.
37. show cpu histogram
    Displays the CPU usage histogram for the device, and optionally, clears the hold time and wait time.
38. show cpu-utilization
    Displays the CPU histogram for the device, and optionally, the CPU utilization for each task running on the device.
39. show default
    Displays the system default settings of the device.
40. show default values
    Displays default, maximum, current, and configured values for system maximum parameters.
41. show dlb-internal-trunk-hash
    Displays the dynamic load balancing (DLB) hashing method for inter-packet-processor (inter-pp) links that connect master and slave units in ICX 7450-48 devices.
42. show dlogger logs
    Displays the logged messages from circular buffer maintained by the distributed logger module.
43. show dlogger module
    Displays distributed logger modules that are available, including their filtering capability status details and filter configuration information.
44. show dot1x
    Displays information about the 802.1X configuration.
45. show dot1x configuration
    Displays detailed information about the 802.1X configuration.
46. show dot1x ip-acl
    Displays the Layer 3 ACLs for 802.1X authentication.
47. show dot1x mac-address-filter
    Displays the MAC address filters active on the device.
48. show dot1x mac-filter
    Shows the layer 2 ACLs for 802.1X authentication.
49. show dot1x mac-session
    Displays information about the dot1x-MAC-session on each port on the device.
50. show dot1x sessions
    Displays 802.1X authentication sessions at the global and interface levels.
51. show dot1x sessions detail
    Displays 802.1X authentication sessions at the global and interface levels.
52. show dot1x statistics
    Displays the 802.1X authentication statistics.
53. show dot1x-mka config
    Shows the MACsec Key Agreement (MKA) configuration for the device.
54. show dot1x-mka config-group
    Shows details for the specified MACsec Key Agreement (MKA) groups configured on this device, or for a designated MKA group.
55. show dot1x-mka sessions
    Displays a summary of all MACsec Key Agreement (MKA) sessions on the device.
56. show dot1x-mka statistics
    Displays current MACsec Key Agreement (MKA) statistics on the interface.
57. show eee-statistics
    Displays the global energy efficient statistics.
58. show eee-statistics ethernet
    Displays the Energy Efficient Ethernet statistics on a specific interface.
59. show errdisable
    Displays information about errdisabled ports.
60. show erspan profile
    Displays information for the Encapsulated Remote Switched Port Analyzer (ERSPAN) profiles.
61. show ethernet loopback interfaces
    Displays the status and details of each Ethernet loopback-enabled port and the associated VLANs.
62. show ethernet loopback resources
    Displays the available resources and the resources that are used by loopback testing.
63. show fdp entry
    Displays detailed Foundry Discovery Protocol (FDP) and Cisco Discovery Protocol (CDP) information for all neighbor devices or for a specific device.
64. show fdp interface
    Displays Foundry Discovery Protocol (FDP) information for an interface.
65. show fdp neighbors
    Displays the Cisco neighbors about which the Ruckus ICX device has learned from Cisco Discovery Protocol (CDP) packets.
66. show fdp traffic
    Displays packet statistics for Foundry Discovery Protocol (FDP) and Cisco Discovery Protocol (CDP).
67. show files
    Displays the list of files stored in flash memory.
68. show file-manager details
    Displays details of the registrations handled by different applications and current ongoing operations.
69. show files disk0
    Displays the contents of the USB flash drive.
70. show flash
    Displays flash memory contents on the device.
71. show flexlink
    Displays Flexlink configuration details.
72. show forwarding-profile
    Displays information about the configured forwarding profile.
73. show hardware ipv6-route
    Displays the hardware information for Layer 3 IPv6 hardware routes.
74. show hardware mac-entry
    Displays the hardware information for a specified MAC address or device.
75. show hardware nexthop usage
    Displays a summary of the Layer 3 unicast hardware next-hop usage.
76. show hardware route
    Displays the hardware information for Layer 3 IPv4 hardware routes.
77. show hmon client configuration
    Displays information on registered attributes for Health Monitor Clients.
78. show hmon client statistics
    Displays client statistics, including failure and restart counts.
79. show hmon client status
    Displays details on the operational status of Health Monitor clients.
80. show hmon status
    Displays basic information on clients registered with the Health Monitor service
81. show ikev2
    Displays global Internet Key Exchange version 2 (IKEv2) configuration information.
82. show ikev2 auth-proposal
    Displays configuration information about Internet Key Exchange version 2 (IKEv2) authentication proposals.
83. show ikev2 policy
    Displays configuration information about Internet Key Exchange version 2 (IKEv2) policies.
84. show ikev2 profile
    Displays configuration information about Internet Key Exchange version 2 (IKEv2) profiles.
85. show ikev2 proposal
    Displays configuration information about Internet Key Exchange version 2 (IKEv2) proposals.
86. show ikev2 sa
    Displays configuration information about current Internet Key Exchange version 2 (IKEv2) security associations (SAs).
87. show ikev2 session
    Displays Internet Key Exchange version 2 (IKEv2) session information that includes rekeys and other negotiated information.
88. show ikev2 statistics
    Displays statistical information about Internet Key Exchange version 2 (IKEv2).
89. show inline power
    Displays the inline power capacity, power allocation, power consumption, and power priority details for Power over Ethernet (PoE) ports.
90. show inline power debug-info
    Displays inline power debug information.
91. show inline power detail
    Displays detailed information about the PoE power supplies installed in a PoE device.
92. show inline power emesg
    Displays a history of Power over Ethernet (PoE) events.
93. show installed-packages
    Displays the list of installed Open-source software (OSS) on a system.
94. show installed-packages detail
    Displays the detailed list of installed Open-source software (OSS) on a system.
95. show interfaces brief
    Displays port information in brief mode.
96. show interfaces ethernet
    Displays Ethernet interface information.
97. show interfaces lag
    Displays information about the LAG interface including counters.
98. show interfaces loopback
    Displays loopback port information.
99. show interfaces management
    Displays the status of a management interface.
100. show interfaces stack-ports
     Use the show interfaces stack-ports command to display information about the stacking ports for all members in a stack.
101. show interfaces tunnel
     Displays tunnel interface information.
102. show interfaces unit
     Displays information about all ports in the stack unit.
103. show interfaces ve
     Displays Virtual Ethernet (VE) interface information.
104. show ip
     Displays global IP configuration information.
105. show ip access-lists
     Displays IPv4 access control list (ACL) information.
106. show ip access-lists bindings
     Displays the current IPv4 ACL-to-interface bindings.
107. show ip access-lists brief
     Displays a summary of configured IPv4 ACLs.
108. show ip arp inspection entries
     Displays Address Resolution Protocol (ARP) inspection entries.
109. show ip bgp
     Displays entries in the IPv4 Border Gateway Protocol (BGP4) routing table.
110. show ip bgp attribute-entries
     Displays BGP4 route-attribute entries that are stored in device memory.
111. show ip bgp config
     Displays active BGP4 configuration information.
112. show ip bgp dampened-paths
     Displays all BGP4 dampened routes.
113. show ip bgp filtered-routes
     Displays BGP4 filtered routes that are received from a neighbor or peer group.
114. show ip bgp flap-statistics
     Displays BGP4 route-dampening statistics for all dampened routes with a variety of options.
115. show ip bgp ipv6
     Displays IPv6 unicast information.
116. show ip bgp neighbors
     Displays configuration information and statistics for BGP4 neighbors of the device.
117. show ip bgp neighbors advertised-routes
     Displays the routes that the device has advertised to the neighbor during the current BGP4 session.
118. show ip bgp neighbors flap-statistics
     Displays the route flap statistics for routes received from or sent to a BGP4 neighbor.
119. show ip bgp neighbors last-packet-with-error
     Displays the last packets with an error from BGP4 neighbors of the device.
120. show ip bgp neighbors received
     Displays Outbound Route Filters (ORFs) received from BGP4 neighbors of the device.
121. show ip bgp neighbors received-routes
     Lists all route information received in route updates from BGP4 neighbors of the device since the soft-reconfiguration feature was enabled.
122. show ip bgp neighbors rib-out-routes
     Displays information about the current BGP4 Routing Information Base (Adj-RIB-Out) for specific neighbors and specific destination networks.
123. show ip bgp neighbors routes
     Lists a variety of route information received in UPDATE messages from BGP4 neighbors.
124. show ip bgp neighbors routes-summary
     Lists all route information received in UPDATE messages from BGP4 neighbors.
125. show ip bgp peer-group
     Displays peer-group information.
126. show ip bgp routes
     Displays statistics for the routes in the BGP4 route table of a device.
127. show ip bgp routes community
     Displays BGP4 route information that is filtered by community and other options.
128. show ip bgp summary
     Displays summarized information about the status of all BGP connections.
129. show ip bgp vrf
     Displays entries in the IPv4 Border Gateway Protocol (BGP4) routing table for a virtual routing and forwarding (VRF) instance.
130. show ip bgp vrf neighbors
     Displays configuration information and statistics for BGP4 neighbors of the device for a virtual routing and forwarding (VRF) instance.
131. show ip bgp vrf routes
     Displays statistics for the routes in the BGP4 route table of a device for a virtual routing and forwarding (VRF) instance.
132. show ip bgp vrf routes community
     Displays BGP4 route information that is filtered by community and other options for a virtual routing and forwarding (VRF) instance.
133. show ip cache
     Displays IP forwarding cache.
134. show ip dhcp-client information
     Displays Dynamic Host Configuration Protocol (DHCP) client visibility configurations.
135. show ip client-pub-key
     Displays the currently loaded public keys.
136. show ip dhcp-client options
     Displays the list of options the Dynamic Host Configuration Protocol (DHCP) client has received from the DHCP server.
137. show ip dhcp relay information
     Displays the configured DHCP relay information options.
138. show ip dhcp relay information brief
     Displays the configured DHCP relay information options in brief.
139. show ip dhcp-server address-pools
     Displays information about Dynamic Host Configuration Protocol (DHCP) address pools.
140. show ip dhcp-server binding
     Displays the IP DHCP server lease entry.
141. show ip dhcp-server flash
     Displays the lease-binding database stored in the flash memory.
142. show ip dhcp-server statistics
     Displays DHCP server statistics for a specific pool or all pools.
143. show ip dhcp-server summary
     Displays the IP DHCP server summary.
144. show ip dhcp snooping
     Displays the DHCP snooping binding database information.
145. show ip dhcp snooping info
     Displays DHCP snooping learned entry information.
146. show ip dhcp snooping vlan
     Displays the DHCP snooping status for a VLAN and the trusted or untrusted ports.
147. show ip dns vrf
     Displays the DNS server-addresses and domain-lists configured for a VRF.
148. show ip http status
     Displays whether HTTP and HTTPS ports are enabled or disabled.
149. show ip igmp group
     Displays the status of Internet Group Management Protocol (IGMP) multicast groups on a device.
150. show ip igmp interface
     Displays the status of a Internet Group Management Protocol (IGMP) multicast enabled port.
151. show ip igmp proxy
     Displays information about the proxy groups and interfaces on the default VRF or, when the vrf keyword is specified, other VRFs.
152. show ip igmp settings
     Displays global Internet Group Management Protocol (IGMP) settings or IGMP settings for a specified virtual routing and forwarding (VRF) instance.
153. show ip igmp ssm-map
     Displays the association between a configured access control list (ACL) and source address mapped to it.
154. show ip igmp static
     Displays information about static IGMP groups.
155. show ip igmp traffic
     Displays the Internet Group Management Protocol (IGMP) traffic status on each port.
156. show ip interface
     Displays useful information about the configuration and status of the IP protocol and its services, on all interfaces.
157. show ip mroute
     Displays information on multicast routes. You can specify whether you want to display information from static or connected mroutes or from a particular mroute.
158. show ip msdp mesh-group
     Displays the details of a specific mesh-group.
159. show ip msdp peer
     Displays Multicast Source Discovery Protocol (MSDP) peer information.
160. show ip msdp rpf-peer
     Displays Multicast Source Discovery Protocol (MSDP) peer information for a reverse-path forwarding (RPF) peer.
161. show ip msdp sa-cache
     Displays the source actives (SA) in the Multicast Source Discovery Protocol (MSDP) cache.
162. show ip msdp summary
     Displays the IP addresses of the Multicast Source Discovery Protocol (MSDP) peers, the state of the device MSDP session with each peer, and statistics for keepalive, source active, and notification messages sent to and received from each of the peers.
163. show ip multicast
     Displays IPv4 IGMP snooping information.
164. show ip multicast cluster mcache
     Displays information in the multicast forwarding mcache.
165. show ip multicast data-plane
     Displays multicast Internet Group Management Protocol (IGMP) data-plane information.
166. show ip multicast error
     Displays information about possible IGMP errors.
167. show ip multicast group
     Displays information about IGMP groups.
168. show ip multicast group match-last-bits
     Displays the groups that share the specified number of lowest bits to match with group address for all VLANs on all ports.
169. show ip multicast mac-mcache
     Displays information in the multicast MAC forwarding mcache.
170. show ip multicast mcache
     Displays information for the IP multicast forwarding mcache.
171. show ip multicast mvr mvlan
     Displays MVLAN to group mapping details.
172. show ip multicast optimization
     Displays Internet Group Management Protocol (IGMP) snooping hardware resource-sharing information.
173. show ip multicast pimsm-snooping
     Displays information related to PIM sparse mode (SM) snooping on the mcache.
174. show ip multicast resource
     Displays information about the software resources used.
175. show ip multicast static-mcache-profile
     Displays information of IP Multicast static-mache profile.
176. show ip multicast traffic
     Displays status information for IGMP snooping traffic.
177. show ip multicast vlan
     Displays Internet Group Management Protocol (IGMP) snooping information for a specific VLAN.
178. show ip mvr interface
     Displays Multicast VLAN Registration (MVR) interface information.
179. show ip mvr mcache
     Displays information about the Multicast VLAN Registration (MVR) forwarding database.
180. show ip mvr setting
     Displays Multicast VLAN Registration (MVR) global settings.
181. show ip os-interface
     Displays information of all current operating system packet interface filters.
182. show ip ospf
     Displays OSPF information.
183. show ip ospf area
     Displays the OSPF area table in a specified format.
184. show ip ospf border-routers
     Displays information about border routers and boundary routers.
185. show ip ospf config
     Displays general OSPF configuration information.
186. show ip ospf database
     Shows OSPFv2 database information.
187. show ip ospf interface
     Displays information about all or specific Open Shortest Path First (OSPF)-enabled interfaces.
188. show ip ospf neighbor
     Displays OSPF neighbor information.
189. show ip ospf redistribute route
     Displays routes that have been redistributed into OSPF.
190. show ip ospf routes
     Displays OSPF calculated routes.
191. show ip ospf summary
     Displays summary information for all OSPF instances.
192. show ip ospf traffic
     Displays OSPF traffic details.
193. show ip ospf trap
     Displays OSPF trap status.
194. show ip ospf virtual link
     Displays information about virtual links.
195. show ip ospf virtual neighbor
     Displays information about virtual neighbors.
196. show ip pim all-vrf
     Displays Protocol Independent Multicast (PIM) information across all active VRFs..
197. show ip pim anycast-rp
     Displays information for an IPv4 PIM Anycast rendezvous point (RP) interface.
198. show ip pim bsr
     Displays bootstrap router (BSR) information.
199. show ip pim counter
     Displays Protocol Independent Multicast (PIM) counter and statistics information.
200. show ip pim counter tbp
     Displays multicast Traverse by Parts (TBP) statistics.
201. show ip pim dense
     Displays PIM Dense configuration information.
202. show ip pim error
     Displays information for Protocol Independent Multicast (PIM) error counters.
203. show ip pim group
     Displays PIM group information.
204. show ip pim hw-resource
     Displays usage and fail-count information for SG entries.
205. show ip pim interface
     Displays information for PIM interfaces.
206. show ip pim jp-policy
     Displays IPv4 Protocol Independent Multicast (PIM) Join and Prune policy configurations.
207. show ip pim mcache
     Displays the PIM multicast cache.
208. show ip pim neighbor
     Displays information about PIM neighbors.
209. show ip pim nsr
     Displays the multicast nonstop routing (NSR) status information.
210. show ip pim optimization
     Displays PIM optimization information.
211. show ip pim prune
     Displays all multicast cache entries that are currently in a pruned state and have not yet aged out.
212. show ip pim resource
     Displays PIM resource information.
213. show ip pim rp-candidate
     Displays candidate rendezvous point (RP) information.
214. show ip pim rp-hash
     Displays rendezvous-point (RP) information for a PIM Sparse group.
215. show ip pim rp-map
     Displays rendezvous-point (RP)-to-group mapping information.
216. show ip pim rp-set
     Displays rendezvous-point (RP)-set list for the device elected as the bootstrap router (BSR).
217. show ip pim rpf
     Displays what PIM sees as the best reverse path to the source. While there may be multiple routes back to the source, the one displayed by this command is the one that PIM thinks is best.
218. show ip pim sparse
     Displays Protocol Independent Multicast (PIM) Sparse configuration information, including whether hardware-drop is enabled, and information for PIM Source-Specific Multicast (SSM) range and access control list (ACL) configuration.
219. show ip pim traffic
     Displays IPv4 PIM traffic statistics.
220. show ip pim vrf
     Displays Protocol Independent Multicast (PIM) information for a virtual routing and forwarding (VRF) instance.
221. show ip pimsm-snooping cache
     Displays the downstream PIM join/prune information for both source-path tree (SPT) and rendezvous-point tree (RPT).
222. show ip reverse-path-check
     Displays the global unicast Reverse Path Forwarding settings.
223. show ip reverse-path-check interface
     Displays unicast Reverse Path Forwarding settings at the interface level on ICX devices.
224. show ip rip
     Displays RIP filters.
225. show ip rip interface
     Displays RIP filters for a specific interface.
226. show ip rip route
     Displays RIP route information for a device or a specific interface.
227. show ip route
     Displays the IP route table information.
228. show ip source-guard
     Displays the learned IP addresses for IP Source Guard ports.
229. show ip ssh
     Displays Secure Shell (SSH) connection session details.
230. show ip ssh sessions
     Displays Secure Shell (SSH) connection and their status.
231. show ip ssl
     Displays SSL certificate details.
232. show ip ssl (FIPS)
     Displays SSL connection details.
233. show ip static mroute
     Displays information for configured multicast routes.
234. show ip static route
     Displays information about IPv4 static routes.
235. show ip static-arp
     Displays the static ARP entries along with static inspect ARP entries.
236. show ip tcp adjust-mss
     Displays the number of TCP SYN/SYN-ACK packets trapped to CPU for MSS modification and number of packets in which MSS is actually modified.
237. show ip tcp connections
     Displays general information about each TCP connection on the router, including the percentage of free memory for each of the internal TCP buffers.
238. show ip tcp traffic
     Displays IP Transmission Control Protocol (TCP) traffic statistics.
239. show ip tcp vrf
     Displays information on TCP connections for specified IPv4 VRFs
240. show ip traffic
     Displays IP traffic statistics.
241. show ip tunnel traffic
     Displays the link status of the tunnel and the number of keepalive packets received and sent on the tunnel.
242. show ip vrrp
     Displays information about IPv4 Virtual Router Redundancy Protocol (VRRP) sessions.
243. show ip vrrp-extended
     Displays information about IPv4 Virtual Router Redundancy Protocol Extended (VRRP-E) sessions.
244. show ipc_stats
     Displays reliable Inter-process Communications (IPC) and dynamic queue statistics.
245. show ipsec card-utilization
     Displays information about the utilization of the IPsec interface module that includes the administration status of the module and traffic statistics.
246. show ipsec profile
     Displays configuration information about IP security (IPsec) profiles.
247. show ipsec proposal
     Displays configuration information about IP security (IPsec) proposals.
248. show ipsec sa
     Displays configuration information about current IP security (IPsec) security associations (SAs).
249. show ipv6
     Displays the details of the IPv6 configuration.
250. show ipv6 access-list
     Displays the IPv6 access control lists (ACLs) configured on a device.
251. show ipv6 access-lists bindings
     Displays the current IPv6 ACL-to-interface bindings.
252. show ipv6 access-lists brief
     Displays a summary of IPv6 ACLs.
253. show ipv6 bgp
     Displays entries in the BGP4+ routing table.
254. show ipv6 bgp attribute-entries
     Displays BGP4+ route-attribute entries that are stored in device memory.
255. show ipv6 bgp config
     Displays active BGP4+ configuration information.
256. show ipv6 bgp dampened-paths
     Displays all BGP4+ dampened routes.
257. show ipv6 bgp filtered-routes
     Displays BGP4+ filtered routes that are received from a neighbor or peer group.
258. show ipv6 bgp flap-statistics
     Displays BGP4+ route-dampening statistics for all dampened routes with a variety of options.
259. show ipv6 bgp neighbors
     Displays configuration information and statistics for BGP4+ neighbors of the device.
260. show ipv6 bgp neighbors advertised-routes
     Displays the routes that the device has advertised to the neighbor during the current BGP4+ session.
261. show ipv6 bgp neighbors flap-statistics
     Displays the route flap statistics for routes received from or sent to a BGP4+ neighbor.
262. show ipv6 bgp neighbors last-packet-with-error
     Displays the last packets with an error from BGP4+ neighbors of the device.
263. show ipv6 bgp neighbors received
     Displays Outbound Route Filters (ORFs) received from BGP4+ neighbors of the device.
264. show ipv6 bgp neighbors received-routes
     Lists all route information received in route updates from BGP4+ neighbors of the device since the soft-reconfiguration feature was enabled.
265. show ipv6 bgp neighbors rib-out-routes
     Displays information about the current BGP4+ Routing Information Base (Adj-RIB-Out) for specific neighbors and specific destination networks.
266. show ipv6 bgp neighbors routes
     Lists a variety of route information received in UPDATE messages from BGP4+ neighbors.
267. show ipv6 bgp neighbors routes-summary
     Displays route summary information for all neighbors or a specified neighbor.
268. show ipv6 bgp peer-group
     Displays peer-group information.
269. show ipv6 bgp routes
     Displays statistics for the routes in the device’s BGP4+ route table.
270. show ipv6 bgp routes community
     Displays BGP4+ route information that is filtered by community and other options.
271. show ipv6 bgp summary
     Displays summarized information about the status of all BGP4+ connections.
272. show ipv6 cache
     Displays IPv6 cache information.
273. show ipv6 dhcp-relay
     Displays the DHCPv6 relay agent information configured on the device.
274. show ipv6 dhcp-relay delegated-prefixes
     Displays information about the IPv6 delegated prefixes.
275. show ipv6 dhcp-relay destinations
     Displays the IPv6 DHCP relay destinations.
276. show ipv6 dhcp-relay interface
     Displays the IPv6 DHCP relay information for a specific interface.
277. show ipv6 dhcp-relay options
     Displays information about the relay options available to the prefixed delegates for a specific interface.
278. show ipv6 dhcp-relay prefix-delegation-information
     Displays information about the IPv6 DHCP prefix delegation.
279. show ipv6 dhcp6-client options
     Displays information about DHCPv6 client options configured on the device.
280. show ipv6 dhcp6-server
     Displays IPv6 DHCP server information.
281. show ipv6 dhcp6 snooping
     Displays the DHCPv6 snooping binding database information.
282. show ipv6 dhcp6 snooping info
     Displays DHCPv6 snooping learned entry information.
283. show ipv6 dhcp6 snooping vlan
     Displays the IPv6 DHCP snooping status on a VLAN.
284. show ipv6 fragment-header
     Displays information about the current status of the IPv6 fragment header bit.
285. show ipv6 interface
     Displays information about the configuration and status of the IP protocol and its services, on all interfaces.
286. show ipv6 mld group
     Displays the list of multicast listening discovery (MLD) groups.
287. show ipv6 mld interface
     Displays multicast listening discovery (MLD) parameters on an interface, including timers, the current querying router, and whether MLD is enabled.
288. show ipv6 mld settings
     Displays Multicast Listener Discovery (MLD) settings.
289. show ipv6 mld static
     Displays static multicast listening discovery (MLD) groups.
290. show ipv6 mld traffic
     Displays information about Multicast Listener Discovery (MLD) traffic.
291. show ipv6 mroute
     Displays information on IPv6 multicast routes. You can specify displaying information either from static or connected mroutes or from a particular mroute.
292. show ipv6 multicast
     Displays IPv6 IGMP snooping information.
293. show ipv6 multicast data-plane
     Displays IPv6 multicast listening discovery (MLD) data-plane information.
294. show ipv6 multicast error
     Displays information about possible multicast listening discovery (MLD) errors.
295. show ipv6 multicast group
     Displays information about multicast listening discovery (MLD) groups.
296. show ipv6 multicast group match-last-bits
     Displays the groups that share the specified number of lowest bits to match with group address for all VLANs on all ports.
297. show ipv6 multicast mac-mcache
     Displays the information in the multicast media access control (MAC) forwarding mcache.
298. show ipv6 multicast mcache
     Displays information in the IPv6 multicast forwarding mcache (multicast listening discovery [MLD]).
299. show ipv6 multicast optimization
     Displays multicast listening discovery (MLD) snooping hardware resource-sharing information.
300. show ipv6 multicast pimsm-snooping
     Displays information related to PIM sparse mode (SM) snooping on the mcache.
301. show ipv6 multicast resource
     Displays information about the software resources used.
302. show ipv6 multicast traffic
     Displays status information for multicast listening discovery (MLD) snooping traffic.
303. show ipv6 multicast vlan
     Displays multicast listening discovery (MLD) snooping information for all VLANs or for a specific VLAN.
304. show ipv6 neighbor
     Displays the IPv6 neighbor table, which contains an entry for each IPv6 neighbor with which the router exchanges IPv6 packets.
305. show ipv6 neighbor inspection
     Displays the status of the neighbor discovery (ND) inspection configuration, details of the VLANs on which ND inspection is enabled, ND static entries, and ND inspection statistics.
306. show ipv6 ospf
     Displays OSPFv3 information.
307. show ipv6 ospf area
     Displays the OSPFv3 area table in a specified format.
308. show ipv6 ospf database
     Displays lists of information about different OSPFv3 link-state advertisements (LSAs).
309. show ipv6 ospf interface
     Displays interface information for all or specific OSPFv3-enabled interfaces.
310. show ipv6 ospf memory
     Displays information about OSPFv3 memory usage.
311. show ipv6 ospf neighbor
     Displays OSPFv3 neighbor information.
312. show ipv6 ospf redistribute route
     Displays all IPv6 routes or a specified IPv6 route that the device has redistributed into OSPFv3.
313. show ipv6 ospf routes
     Displays OSPFv3 routes.
314. show ipv6 ospf spf
     Displays OSPFv3 SPF node, table, and tree information.
315. show ipv6 ospf summary
     Displays summary information for all OSPFv3 instances.
316. show ipv6 ospf virtual-links
     Displays information about all OSPFv3 virtual links or specified links.
317. show ipv6 ospf virtual-neighbor
     Displays information about OSPFv3 virtual neighbors.
318. show ipv6 pim anycast-rp
     Displays information for an IPv6 PIM Anycast rendezvous point (RP) interface.
319. show ipv6 pim bsr
     Displays information on a device that has been elected as the bootstrap router (BSR).
320. show ipv6 pim counter
     Displays IPv6 PIM counter and statistics information.
321. show ipv6 pim error
     Displays information for IPv6 Protocol Independent Multicast (PIMv6) error counters.
322. show ipv6 pim group
     Displays IPv6 PIM group information.
323. show ipv6 pim hw-resource
     Displays usage and fail-count information for SG entries on virtual routing and forwarding instances (VRFs).
324. show ipv6 pim interface
     Displays information for IPv6 PIM interfaces.
325. show ipv6 pim jp-policy
     Displays IPv6 Protocol Independent Multicast (PIMv6) Join and Prune policy configurations.
326. show ipv6 pim mcache
     Displays the IPv6 PIM multicast cache.
327. show ipv6 pim nsr
     Displays the multicast nonstop routing (NSR) status information.
328. show ipv6 pim resource
     Displays PIM resource information.
329. show ipv6 pim rp-candidate
     Displays candidate rendezvous point (RP) information.
330. show ipv6 pim rp-hash
     Displays rendezvous-point (RP) information for an IPv6 PIM Sparse group.
331. show ipv6 pim rp-map
     Displays rendezvous-point (RP)-to-group mapping information.
332. show ipv6 pim rp-set
     Displays rendezvous-point (RP)-set list for the device elected as the bootstrap router (BSR).
333. show ipv6 pim rpf
     Displays what PIM sees as the best reverse path to the source. While there may be multiple routes back to the source, the one displayed by this command is the one that PIM thinks is best.
334. show ipv6 pim sparse
     Displays Protocol Independent Multicast (PIM) Sparse configuration information for IPv6, including whether hardware-drop is enabled, and information for PIM Source-Specific Multicast (SSM) range and access control list (ACL) configuration, and route-precedence settings.
335. show ipv6 pim traffic
     Displays IPv6 PIM traffic statistics.
336. show ipv6 pimsm-snooping cache
     Displays the downstream PIM join/prune information for both source-path tree (SPT) and rendezvous-point tree (RPT).
337. show ipv6 raguard
     Displays the Router Advertisement (RA) guard configuration details.
338. show ipv6 rip
     Shows RIPng configuration information for the device.
339. show ipv6 rip route
     Displays the RIPng routing table.
340. show ipv6 route
     Displays the IPv6 route table information.
341. show ipv6 router
     Displays information about the IPv6 routers connected to an IPv6 host.
342. show ipv6 static bfd
     Displays information about BFD for IPv6 static routes.
343. show ipv6 static mroute
     Displays information for configured IPv6 multicast routes.
344. show ipv6 static route
     Displays information about IPv6 static routes.
345. show ipv6 tcp adjust-mss
     Displays the number of TCP SYN/SYN-ACK packets trapped to CPU for MSS modification and number of packets in which MSS is actually modified.
346. show ipv6 tcp connections
     Displays general information about each TCP connection on the router, including the percentage of free memory for each of the internal TCP buffers.
347. show ipv6 tcp traffic
     Displays IPv6 Transmission Control Protocol (TCP) traffic statistics.
348. show ipv6 tcp status
     Displays detailed information about a specified TCP connection.
349. show ipv6 tcp vrf
     Displays information on TCP connections for specified IPv6 VRFs
350. show ipv6 traffic
     Displays IPv6 traffic statistics.
351. show ipv6 tunnel
     Displays a summary of IPv6 tunnel information.
352. show ipv6 tunnel traffic
     Displays statistics about IPv6 tunnel traffic.
353. show ipv6 vrrp
     Displays information about IPv6 Virtual Router Redundancy Protocol (VRRP) sessions.
354. show ipv6 vrrp-extended
     Displays information about IPv6 Virtual Router Redundancy Protocol Extended (VRRP-E) sessions.
355. show issu errors
     Displays stack upgrade error information when an upgrade is in progress.
356. show issu sequence
     Displays the sequence in which units will be upgraded.
357. show issu status
     Displays the pre–in-service software upgrade (ISSU) check results and monitors the status of the current upgrade.
358. show keychain
     Displays keychain-related configuration and status information.
359. show lag
     Displays Link Aggregation Group (LAG) information.
360. show license
     Displays information about Self Authenticated Upgrade licenses installed on a device.
361. show license installed
     Displays detailed information about Self Authenticated Upgrade licenses installed on a device.
362. show license node-locked
     Displays information about all node-locked software licenses on a device.
363. show license non-node-locked
     Displays information about all non-node-locked software licenses on a device.
364. show license unit
     Displays general information about all software licenses on a device.
365. show link-error-disable
     Displays the ports that are enabled with the port flap dampening feature.
366. show link-keepalive
     Displays the UDLD information.
367. show link-oam info
     Displays the OAM information on EFM-OAM-enabled ports.
368. show link-oam statistics
     Displays the OAM statistics of OAM-enabled ports.
369. show lldp
     Displays a summary of the Link Layer Discovery Protocol (LLDP) configuration settings.
370. show lldp local-info
     Displays the details of the Link Layer Discovery Protocol (LLDP) advertisements that will be transmitted on each port.
371. show lldp neighbors
     Displays a list of current LLDP neighbors and details of the latest advertisements received from Link Layer Discovery Protocol (LLDP) neighbors.
372. show lldp statistics
     Displays Link Layer Discovery Protocol (LLDP) global and per-port statistics.
373. show local-userdb
     Displays a list of local user databases configured on the device and the number of users in each database.
374. show logging
     Displays the syslog messages in the device local buffer.
375. show logging debug
     Displays the debug logs maintained in the log manager.
376. show logging debug analyse statistics
     Displays detailed information about repeated log entries, including the frequency and timestamps of each repeated log.
377. show loop-detection resource
     Displays the hardware and software resource information about loop detection.
378. show loop-detect no-shutdown-status
     Shows the status of interfaces in a loop.
379. show loop-detection status
     Displays loop detection status.
380. show lrm-adapter ethernet
     Displays the LRM adapter parameters.
381. show l2protocol dot1q-tunnel
     Displays Q-in-Q BPDU tunnel information.
382. show mac access-lists
     Displays information for all Layer 2 (MAC) ACLs.
383. show mac access-lists bindings
     Displays MAC ACL binding information.
384. show mac access-lists brief
     Displays a list of all MAC ACLs by name.
385. show mac access-lists name
     Displays information for a specified MAC ACL.
386. show mac-address
     Displays the MAC address table.
387. show mac-address cluster
     Displays all the MAC address entries for a cluster.
388. show mac-address mdb
     Displays information about the MAC database used in cluster configuration.
389. show mac-address debug-distributed
     Displays the hardware-programmed MAC address entry from all the stack units.
390. show mac-authentication configuration
     Displays the global or interface level MAC authentication configuration.
391. show mac-authentication ip-acl
     Shows the Layer 3 access lists (ACLs) for MAC authentication.
392. show mac-authentication sessions
     Displays MAC authentication sessions at the global and interface levels.
393. show mac-authentication sessions detail
     Displays details of MAC authentication sessions for a specific interface.
394. show mac-authentication statistics
     Displays the MAC authentication statistics.
395. show macsec statistics ethernet
     Displays status information and secure channel statistics for the designated MACsec interface.
396. show manager counters
     Displays the number of times the Secure Sockets Layer (SSL) server has connected to and disconnected from SmartZone.
397. show manager log
     Displays information about the connection between an ICX device and the ICX-Manager.
398. show manager service-validation status
     Displays the service validation test result upload status sent from the ICX switch to RUCKUS One.
399. show manager sessions
     Displays the Telnet and SSH sessions used by the ICX-Manager.
400. show manager status
     Displays the ICX-Manager IP address and the status of the connection with the ICX-Manager.
401. show manager status query
     Displays detailed information about the ICX-Manager query and response.
402. show manager tcp connections
     Displays TCP connections used by the ICX-Manager.
403. show management access
     Displays information on access restrictions or permissions applied to management protocols.
404. show management traffic exclusion
     Displays the port types and application types that are excluded from in-band or out-of-band (OOB) management ports.
405. show management-vrf
     Displays management Virtual Routing and Forwarding (VRF) packet and session rejection statistics including dropped packets due to failure in management VRF validation.
406. show media
     Displays information about the media devices installed per device, per stack, and per port.
407. show memory
     Displays the memory usage for system tasks, transmission control protocol, and stack units.
408. show memory mem-leak
     Displays memory leak information of FastIron process and other supported processes.
409. show memory task
     Displays the memory usage, allocated memory, and free memory for system tasks on the device.
410. show metro-ring
     Displays the metro ring details.
411. show mirror
     Displays the port mirroring configuration details.
412. show module
     Displays module information for stack members.
413. show monitor
     Displays the monitored ports configurations.
414. show mstp
     Displays the Multiple Spanning Tree Protocol (MSTP) information.
415. show mstp root-protect
     Displays the MSTP root-protect information.
416. show mvrp
     Displays Multiple VLAN Registration Protocol (MVRP) information.
417. show notification mac-movement
     Displays the MAC address movement notifications.
418. show notification-mac
     Displays whether MAC-notification for SNMP traps is enabled or disabled.
419. show ntp associations
     Displays association information for all NTP servers and peers.
420. show ntp status
     Displays the Network Time Protocol (NTP) status.
421. show openflow
     Displays the configured OpenFlow parameters.
422. show openflow datapath-id
     Displays the data path ID assigned to the device.
423. show openflow controller
     Displays the controller information in a flow.
424. show openflow flows
     Displays the flows information on the OpenFlow ports.
425. show openflow groups
     For a group or a range of groups, displays the maximum number of actions in a bucket, the maximum number of buckets in a group, and the maximum number of groups.
426. show openflow interface
     Displays the information about the interfaces in a OpenFlow flow.
427. show openflow meters
     Displays all the meters in a OpenFlow flow.
428. show optic
     Displays the fiber-optic temperature and power information for qualified QSFP+, SFP, or SFP+ transceivers installed in a device.
429. show optic-timer
     Displays the digital optical monitoring (DOM) time interval setting.
430. show overlay-gateway
     Displays information for all overlay gateways, a specific gateway, a VLAN, VXLAN Network Identifier (VNI), or remote site.
431. show packet-inerror-detect
     Displays details related to the monitoring for inError packets for configured ports.
432. show pki
     Displays information on PKI, including information on certificates and other options.
433. show pod
     Displays Ports on Demand (PoD) licensing information.
434. show policy-routing
     Displays information on policy-based routing (PBR) at the global or interface level.
435. show port-profile
     Displays the port profile information.
436. show port-profile-mac-oui
     Displays all the profile MAC-OUI settings.
437. show port-profile-lldp
     Displays the profile LLDP settings.
438. show port security
     Displays the port security information.
439. show power-savings-statistics
     Displays the power savings statistics for the device.
440. show pre-8090-startup-backup
     Displays the current startup-config and backup startup-config files when a backup was created on an upgrade to FastIron 08.0.90.
441. show priority-flow-control
     Displays the priority flow control (PFC) on the system.
442. show protected-port
     Displays the system-wide configuration status of protected ports.
443. show pstat
     Displays the CPU packet statistics counters, including the counts and the rate at which packets were received.
444. show pstat dump
     Displays the contents of the CPU queue and port status.
445. show pstat hist
     Displays per-second CPU packet statistics for the specified period of time.
446. show pstat status
     Displays the fields specified for collecting CPU packet statistics and whether CPU packet statistics collection is enabled.
447. show ptp-clock
     Displays the PTP transparent clock information.
448. show pvlan
     Displays the PVLAN information.
449. show pvstplus-protect-ports
     Displays the status of the PVST+ Protect feature, configured by means of the pvstplus-protect command.
450. show qd-buffer-profile
     Displays the user-configurable buffer profile configuration on the device.
451. show qos egress-buffer-profile
     Displays information about egress buffer profiles.
452. show qos guaranteed-rate
     Displays the minimum guaranteed bandwidth for each QoS queue.
453. show qos ingress-buffer-profile
     Displays information about ingress buffer profiles.
454. show qos priority-to-pg
     Displays priority-to-priority-group (PG) mapping for priority flow control (PFC).
455. show qos scheduler-profile
     Displays information about scheduler profiles.
456. show qos sflow-rate-limit
     Displays the CPU rate limit for sFlow.
457. show qos-internal-trunk-queue
     Displays the queue-share level of inter-packet-processor (inter-pp) links used to connect master and slave units in ICX 7450 devices.

     Is this command supported only on the ICX 7450? If so, remove this bit from the short desc and add a Usage Guidelines section with the sentence "This command is supported only on the Brocade ICX 7450" You can copy the section from the view template in the resources folder.
458. show qos-profiles
     Displays information about QoS profiles
459. show qos-tos
     Displays mappings in the DSCP to the forwarding priority portion of the QoS information display.
460. show radius servers
     Displays the current status of the linked RADIUS servers.
461. show rate-limit broadcast
     Displays the broadcast limit configured on the device.
462. show rate-limit input
     Displays the fixed rate limiting configuration.
463. show rate-limit output-shaping
     Displays the configured outbound rate shaper.
464. show rate-limit unknown-unicast
     Displays the unknown unicast limit for each port region to which it applies.
465. show rear-module
     Displays operational status and configuration of the rear module.
466. show relative-utilization
     Displays utilization percentages for an uplink.
467. show reload
     Displays how much time is remaining before a scheduled system reload.
468. show reserved-vlan-map
     Displays the assigned VLAN IDs for reserved VLANs.
469. show restconf config
     Displays information about RESTCONF configurations.
470. show restconf event-counters
     Displays information about RESTCONF event counters.
471. show restconf event-map
     Displays RESTCONF event mapping information.
472. show restconf running-config
     Displays RESTCONF running configuration information.
473. show restconf status
     Displays the RESTCONF status.
474. show rmon
     Displays the Remote Monitoring (RMON) agent status and information about RMON alarms, events, history, logs, and statistics on the interface.
475. show rspan-vlan
     Displays information about Remote Switched Port Analyzer (RSPAN) VLANs.
476. show run mvrp
     Displays the Multiple VLAN Registration Protocol (MVRP) running configuration.
477. show running-config
     Retrieves current running configuration from the system.
478. show running-config access-list
     Displays information about configured and active ACLs.
479. show running-config interface cpu active
     Displays information about the configuration of the CPU interface on the active unit.
480. show running-config interface ethernet
     Displays the status of a specific Ethernet interface.
481. show running-config interface tunnel
     Displays the status of a specific tunnel interface.
482. show running-config interface ve
     Displays the status of a specific Virtual Ethernet (VE) interface.
483. show running-config vlan
     Displays information about all VLANs or a specified VLAN.
484. show running ikev2
     Displays current Internet Key Exchange version 2 (IKEv2) configuration information.
485. show running interface
     Displays information about the interface.
486. show scheduler-profile
     Displays the user-configurable scheduler profile configuration.
487. show sflow
     Displays the sFlow configuration and statistics.
488. show snmp
     Displays various SNMP statistics.
489. show span
     Displays the Spanning Tree Protocol (STP) information for the device.
490. show span designated-protect
     Displays a list of all ports that are not allowed to go into the designated forwarding state.
491. show spx
     Displays information on the Switch Port Extender (SPX) topology.
492. show spx cb-port
     Displays information on the Port Extender (PE) chain attached to the designated control bridge (CB) port number in a Switch Port Extender (SPX) system.
493. show spx connections
     Displays information on SPX port connections.
494. show spx csp
     Displays Control and Status Protocol (CSP) information for the specified PE or all PE units.
495. show spx debug
     Displays debug information for an SPX port, an SPX LAG, or a set of ports or LAGs.
496. show spx lag
     Displays SPX LAG information about a Switch Port Extender (SPX) Link Aggregation Group (LAG).
497. show spx mecid
     Displays IEEE 802.1BR Switch Port Extender (SPX) multicast E-channel identifier (E-CID) information.
498. show spx multicast cache
     Displays multicast E-CID forwarding entries for the PE.
499. show spx multicast counters
     Displays the number of failures that have occurred while adding, deleting, or updating the multicast forwarding cache entries in PE unit hardware in a Campus Fabric (SPX) network.
500. show spx multicast optimization
     Displays the multicast replication resource optimization details for the PE unit.
501. show spx multicast resource
     Displays multicast memory pool details for the PE unit.
502. show spx pe-id
     For the designated port extender (PE) in a Switch Port Extender (SPX) system, displays status information or information on the PE chain.
503. show spx pe-group
     In a Switch Port Extender (SPX) system, specifies the port extender (PE) group for which the PE chain is displayed.
504. show spx pe-port-vlan-resources
     Displays VLAN resources per PE port for an SPX (Campus Fabric) system.
505. show spx ring
     Displays information on port extender (PE) rings or chains in a Switch Port Extender (SPX) system.
506. show spx zero-touch ipc
     Displays statistics for Inter-Processor Communication (IPC) used by zero-touch-enable and spx interactive-setup processes.
507. show spx zero-touch log
     Displays the contents of the internal Campus Fabric Zero-touch provisioning log.
508. show spx zero-touch status
     Indicates whether Campus Fabric Zero-touch provisioning is enabled and active.
509. show spx-mon
     Gives a snapshot of the SPX system.
510. show stack
     Displays information about the units in a stack and a representation of the stack topology.
511. show stack connection
     Displays a representation of stack topology and a detailed connection report that contains information on connection errors or hardware failures.
512. show stack detail
     Displays information on all units in the stack, including the role, MAC address, priority, status, and stack connections for each stack unit.
513. show stack failover
     Displays information about stack failover.
514. show stack flash
     Displays information about flash memory for stack members.
515. show stack ipc stats
     Displays IPC statistics for the stack.
516. show stack link-sync
     Displays the status of the link synchronization.
517. show stack neighbors
     Displays information about stack member neighbors.
518. show stack rel-ipc stats
     Displays statistics on reliable Interprocessor Communications (IPC) communications that occur between stack units during a session.
519. show stack stack-ports
     Displays status information about stack-ports.
520. show stack zero-touch ipc
     Displays information on stack zero-touch inter-processor communication (IPC) statistics.
521. show stack zero-touch log
     Displays internal logs for stack zero-touch provisioning or stack interactive-setup activity.
522. show stack zero-touch status
     Displays status information for stack zero-touch provisioning or interactive-setup.
523. show startup-config (SPX)
     Displays the startup configuration the PE unit would use in regular switch or router mode.
524. show statistics
     Displays packet statistics.
525. show statistics dos-attack
     Displays information about ICMP and TCP SYN packets dropped because burst thresholds were exceeded.
526. show statistics dos-attack icmp
     Displays information about ICMP packets that exceeded burst thresholds.
527. show statistics dos-attack icmp fragments
     Displays information about ICMP packet fragments received.
528. show statistics dos-attack tcp
     Displays information about TCP SYN packets that exceeded burst thresholds.
529. show statistics stack-ports
     Displays information about all stacking ports in a stack topology.
530. show statistics traffic-policy
     Displays the rate limiting traffic counters and the total packet count and byte count of the traffic filtered by ACL statements.
531. show statistics tunnel
     Displays statistical information for GRE and IPsec tunnels.
532. show stp-bpdu-guard
     Displays the BPDU guard state.
533. show stp-group
     Displays STP topology groups.
534. show stp-protect-ports
     Displays the STP protection configuration.
535. show symmetrical-flow-control
     Displays the status of symmetrical flow control.
536. show sz sessions
     Displays the Telnet and SSH sessions used by SmartZone.
537. show sz status
     Displays the SmartZone IP address lists and information about the status of the connection with SmartZone.
538. show sz tcp connections
     Displays TCP connections used by SmartZone.
539. show tech-support
     Displays technical support information.
540. show telnet
     Displays Telnet connection and configuration details.
541. show topology-group
     Displays topology group information.
542. show traffic-policy
     Displays traffic policies that are currently defined on the device.
543. show transmit-counter
     Displays traffic counter (also called transmit counters) profiles and traffic counter statistics.
544. show users
     Displays the user account information.
545. show uufb enabled-ports
     Displays the ports that are enabled for Unknown Unicast Flood Blocking (UUFB).
546. show version
     Displays the new flash image running on the device.
547. show vlan
     Displays the VLAN information.
548. show vlan-group
     Displays the VLAN group configuration information.
549. show voice-vlan
     Displays the configuration of a voice VLAN for a particular port or for all ports.
550. show vrf
     Displays IP information for the specified Virtual Routing and Forwarding (VRF).
551. show vsrp
     Displays the Virtual Switch Redundancy Protocol (VSRP) information.
552. show vxlan tunnel
     Displays overlay gateway tunnel information.
553. show web
     Displays web login details.
554. show webauth
     Displays Web Authentication configuration details.
555. show who
     Displays details of the SSH and Telnet connections.