pstat field-add

Specifies the fields for which statistics on the number of packets sent to the CPU will be collected.
Syntax
pstat field-add { input-port | l2-dest-mac |l2-dest-mac-type|l2-source-mac}
Command Default

CPU packets statistics are not collected by default.

Parameters
input-port
Collects CPU packet statistics based on the inbound Ethernet port.
l2-dest-mac
Collects CPU packet statistics based on the Layer 2 destination MAC address.
l2-dest-mac-type
Collects CPU packet statistics based on the Layer 2 destination MAC address type: broadcast, unicast, or multicast.
l2-source-mac
Collects CPU packet statistics based on the Layer 2 source MAC address.
Modes

Global configuration mode

Usage Guidelines

The system can be configured to collect statistics on packets destined for the CPU based based on a set of specified fields. The pstat field-add command specifies the fields for which packets will be counted.

Examples
device# configure terminal
device(config)# pstat field-add l2-dest-mac
device(config)# pstat field-add input-port
device(config)# pstat field-add l2-dest-mac-type
device(config)# pstat max 3
device(config)# pstat start

device(config)# show pstat 11

input-port        l2-dest-mac       l2-dest-mac-type  Count
--------------------------------------------------------------
mgmt1             0100.5e00.0002    Multicast         19
11/1/7            0180.c200.0000    Multicast         10
2/1/7             0180.c200.000e    Multicast         1
11/1/7            0180.c200.000e    Multicast         1
mgmt1             0180.c200.0000    Multicast         10
mgmt1             cf4e.2445.0400    Multicast         19
mgmt1             778e.f8d4.00c0    Multicast         63
mgmt1             ffff.ffff.ffff    Broadcast         23
--------------------------------------------------------------

Number of Entries = 8
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh