subnet6 (DHCPv6)

Configures a subnet for a DHCPv6 server and accesses DHCPv6 subnet configuration mode.
Syntax
subnet6 ipv6-prefix
Command Default

A subnet is not configured.

Parameters
ipv6-prefix
Specifies the IPv6 prefix.
Modes

DHCPv6 server configuration mode

Usage Guidelines

To use this command, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

The no form of the command restores the default.

Examples

The following example configures a subnet for a DHCPv6 server and enters DHCPv6 subnet configuration mode. 

device# configure terminal
device(config)# ipv6 dhcp6-server enable
device(config-dhcp6)# subnet6 3ffe:501:ffff:100::/64
device(config-dhcpv6-subnet)#
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Commands Si - Z