trust dscp

Configures the device to honor DSCP-based QoS for routed and switched traffic.
Syntax
trust dscp
no trust dscp
Command Default

The interface honors the Layer 2 CoS value.

Modes

Interface configuration mode

Usage Guidelines

The no form of the command disables the device from honoring DSCP-based QoS.

Note: This command is not supported with 802.1p priority override.
Examples

The following example honors DSCP-based QoS. 

device(config)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# trust dscp
Parent topic: Commands Si - Z