mvrp point-to-point

Configures a point-to-point interface for Multiple VLAN Registration Protocol (MVRP).
Syntax
mvrp point-to-point
no mvrp point-to-point
Command Default

A point-to-point interface is not enabled by default.

Modes

Interface configuration mode

Usage Guidelines

If the MVRP-enabled port is connected to a shared media, the port must be configured as non Point-to-point mode using the no mvrp point-to-point command.

The no form of the command sets the interface to non-point-to-point mode.

Examples

The following example configures a point-to-point interface for MVRP. 

device# configure terminal
device(config)# interface ethernet 1/1/25
device(config-if-e1000-1/1/25)# mvrp point-to-point
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Commands M