show bfd

Displays Bidirectional Forwarding Detection (BFD) information.
Syntax
show bfd
Modes

User EXEC mode

Usage Guidelines

This command is supported for ICX 7850 devices only.

The show bfd command displays the following information:

Output Field

Description

BFD State

Specifies whether BFD is enabled or disabled on the device.

Version

Specifies the version of the BFD protocol operating on the device

Sessions

The number of BFD sessions currently in operation on the device.

Total count

The number of BFD sessions currently in operation on the device.

Max Allowed

The maximum number of BFD sessions that can be configured on the device.

Maximum Reach Count

The number of times the request to set up a BFD session was declined because the maximum number of BFD sessions allowed on the device would have been exceeded.

Micro Sessions

The number of micro-BFD sessions currently in operation on the device.

Micro-BFD

 

oper-state

Micro-BFD operational state.

config-state

Micro-BFD configuration state

Protocols Registration Count

Specifies the protocols that are registered for the BFD session.

Number of Interfaces with controller configuration

The number of interfaces with controller configuration.

Nhop-Intf

The nexthop interface.

Sessions-count

The number of BFD sessions configured for the interface.

M-BFD[Lag per-link]

Micro-BFD configuration on the interface.

Examples

The following example shows sample output from the show bfd command. 

device> show bfd

 BFD State: ENABLE    Version: 1
 Sessions      : Total count: 2    Max Allowed: 256    Max Reach Count: 0
 Micro Sessions: Total count: 0    Max Allowed: 0    Max Reach Count: 0
 Micro-bfd: oper-state:  disabled,  config-state:  disabled
 Protocols Registration Count: 5
     bgp/default-vrf  ospf/white  static/default-vrf  static/white  ospf/default-vrf

 Number of Interfaces with controller configuration: 2
    Nhop-Intf   Sessions-count  M-BFD[Lag per-link]
    ---------   --------------  -------------------
    1/1/13      1               no
    1/1/14      1               no
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Show Commands