interface group-ve

Associates the virtual interface routing group with a VLAN group.
Syntax
interface group-ve num
no interface group-ve num
Command Default

A virtual routing interface group is not associated with a VLAN group.

Parameters
num

Specifies the VLAN group ID with which you want to associate the virtual routing interface group.

Modes

Global configuration mode

Usage Guidelines

The VLAN group must already be configured and enabled to use a virtual routing interface group. The software automatically associates the virtual routing interface group with the VLAN group that has the same ID. You can associate a virtual routing interface group only with the VLAN group that has the same ID.

When you configure a virtual routing interface group, all members of the group have the same IP subnet address.

Note: Configuring a virtual interface routing group is not supported with IPv6. Configuring a virtual interface routing group is supported only with the OSPF, VRRPv2, and VRRP-Ev2 protocols.

The no form of the command removes the virtual routing interface group from a VLAN group.

Examples

The following example shows how to associate the virtual routing interface group with a VLAN group. 

device(config)# vlan-group 1
device(config-vlan-group-1)# group-router-interface
device(config-vlan-group-1)# exit
device(config)# interface group-ve 1
Parent topic: Commands I