responder-only

Configures responder-only mode for an IKEv2 profile.
Syntax
responder-only
no responder-only
Command Default

The responder-only mode is disabled.

Modes

IKEv2 profile configuration mode

Usage Guidelines

By default responder-only mode is disabled and the device behaves as both initiator and responder so that IKEv2 negotiations start when the IKEv2 peer is reachable.

In responder-only mode, the device is passive and does not initiate negotiation or re-keying to establish an IKEv2 security association (SA).

The no form of the command disables responder-only mode.

Examples

The following example enables responder-only mode for an IKEv2 profile named ikev2_profile1. 

device# configure terminal
device(config)# ikev2 profile ikev2_profile1
device(config-ike-profile-ikev2_profile1)# responder-only
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh