multicast sdvoe

Enables Software Defined Video-over-Ethernet (SDVoE) for an IGMP-snooping-enabled VLAN.
Syntax
multicast sdvoe { auto-edge-port-track-act | auto-edge-port-track-pas }
no multicast sdvoe { auto-edge-port-track-act | auto-edge-port-track-pas }
Command Default

SDVoE is disabled for a VLAN.

Parameters
auto-edge-port-track-act
Specifies multicast active, dynamic edge port and IGMPv2 and IGMPv3 client tracking.
auto-edge-port-track-pas
Specifies multicast passive, dynamic edge port and IGMPv2 and IGMPv3 client tracking.
Modes

VLAN configuration mode

Usage Guidelines

The no form of the disables SDVoE for in an IGMP-snooping-enabled VLAN.

Examples

The following example enables SDVOE and configures a multicast active dynamic edge port and IGMPv2 and IGMPv3 client tracking for an IGMP-snooping-enabled VLAN. 

device# configure terminal
device(config)# vlan 10
device(config-vlan-10) multicast sdvoe auto-edge-port-track-act

The following example enables SDVOE and configures a multicast passive dynamic edge port and IGMPv2 and IGMPv3 client tracking for an IGMP-snooping-enabled VLAN. 

device# configure terminal
device(config)# vlan 10
device(config-vlan-10) multicast sdvoe auto-edge-port-track-pas
History
Release version Command history
09.0.00 This command was introduced.
Parent topic: Commands M