peer disable-fast-failover

Disables the MCT fast-failover mode.
Syntax
peer peer-ip disable-fast-failover
no peer peer-ip disable-fast-failover
Command Default

Fast-failover is configured on the device.

Parameters
peer-ip
Specifies the IP address of the peer device.
Modes

Cluster configuration mode

Usage Guidelines

The following failover modes can be configured with MCT:

  • Fast-failover (default) - As soon as the ICL interface goes down, the MCT control path between the two peer devices goes down. All the remote MAC addresses are flushed.
  • Slow-failover - Even if the ICL interface goes down, the CCP waits for the hold-time before taking the MCT control path between the two peer devices down. Remote MAC addresses are flushed only when the MCT control path between the two peer devices is down.

The no form of the command re-enables fast-failover.

Examples

The following example shows how to disable fast-failover. 

device(config)# cluster SX
device(config-cluster-SX)# peer 10.1.1.3 disable-fast-failover
Parent topic: Commands O, P, Q, R, and Sa through Sh