terminal monitor

Enables the real-time display for a Telnet or SSH session.
Syntax
terminal monitor
Command Default

Real-time display is not enabled.

Modes

Privileged EXEC mode

Usage Guidelines

The command toggles the feature on and off. The CLI displays a message to indicate the status change for the feature. To enable or disable the feature in the management session, enter the terminal monitor command again.

Any terminal logged on to a RUCKUS switch can receive real-time Syslog messages when the terminal monitor command is issued.

Examples

The following example enables real-time display for a Telnet or SSH session. 

device# terminal monitor
Syslog trace was turned ON
SYSLOG: <9>device, Power supply 2, power supply on left connector, failed
SYSLOG: <14>device, Interface ethernet 6, state down
SYSLOG: <14>device, Interface ethernet 2, state up

The following example disables real-time display for a Telnet or SSH session. 

device# terminal monitor
Syslog trace was turned OFF
Parent topic: Commands Si - Z