show ipv6 multicast pimsm-snooping

Displays information related to PIM sparse mode (SM) snooping on the mcache.
Syntax
show ipv6 multicast pimsm-snooping [ vlan vlan-id ] [ cache ipv6-address ] [ resources ]
Parameters
cache ipv6-address
Specifies the PIM SM Snooping cache.
vlan vlan-id
Specifies snooping for a VLAN.
resources
Specifies PIM SM snooping resources.
Modes

Privileged EXEC mode

Usage Guidelines

Use the show ipv6 pimsm-snooping cache command to display information related to the PIM SM snooping outgoing interface (OIF) in the mcache.

The show ipv6 pimsm-snooping cache command displays the following information:

Field

Description

VLAN ID

The port-based VLAN to which the following information applies and the number of members in the VLAN.

PIM6 SM Neighbor list

The PIM6 SM routers that are attached to the Layer 2 Switch ports.

The value following "expires" indicates how many seconds the Layer 2 Switch will wait for a hello message from the neighbor before determining that the neighbor is no longer present and removing the neighbor from the list.

Multicast Group

The IP address of the multicast group.

Note: The fid and camindex values are used by RUCKUS Technical Support for troubleshooting.

Forwarding Port

The ports attached to the group receivers. A port is listed here when it receives a join message for the group, an MLD membership report for the group, or both.

PIMv2 Group Port

The ports on which the Layer 2 Switch has received PIM6 SM join messages for the group.

Source, Port list

The IP address of each PIM6 SM source and the Layer 2 Switch ports connected to the receivers of the source.

Examples

The following example shows PIM SM information for the mcache: 

Device#show ipv6 multicast pimsm-snooping 
Example: Port: 7/3 (ref_count=1)
         ref_count: no of entries in pimsm snoop cache added this oif)

vlan 503, has 1 caches.
1    (* 2:3) has 1 pim join ports out of 1 OIF
     1/1/4 (ref_count=2),
Parent topic: Show Commands