show ipv6 rip

Shows RIPng configuration information for the device.
Syntax
show ipv6 rip
Modes

Privileged EXEC mode or any configuration mode

The show ipv6 rip command displays the following information:

Output field Description
IPv6 RIP status/port

The status of RIPng on the device. Possible status is "enabled" or "disabled." The UDP port number over which RIPng is enabled.

Administrative distance The setting of the administrative distance for RIPng.
Updates/expiration The settings of the RIPng update and timeout timers.
Holddown/garbage collection The settings of the RIPng hold-down and garbage-collection timers.
Split horizon/poison reverse

The status of the RIPng split horizon and poison reverse features. Possible status for each is "on" or "off."

Default routes The status of RIPng default routes.
Periodic updates/trigger updates

The number of periodic updates and triggered updates sent by the RIPng device.

Distribution lists The inbound and outbound distribution lists applied to RIPng.
Redistribution

The types of IPv6 routes redistributed into RIPng. The following types of routes can be redistributed:

STATIC

CONNECTED

BGP - BGP4+

OSPF - OSPFv3

Examples

The following example shows settings for RIPng, which is enabled on UDP port 521. Connected, static, OSPFv3, and BGP4+ routes are redistributed through IPv6. 

device# show ipv6 rip
IPv6 rip enabled, port 521
Administrative distance is 120
Updates every 30 seconds, expire after 180
Holddown lasts 180 seconds, garbage collect after 120
Split horizon is on; poison reverse is off
Default routes are not generated
Periodic updates 5022, trigger updates 10
Distribute List, Inbound : Not set
Distribute List, Outbound
Redistribute: CONNECTED STATIC OSPF BGP
Parent topic: Show Commands