show ip rip
Displays RIP filters.
Modes
Privileged-EXEC mode
The
show ip rip command displays the following information:
| Output field | Description |
|---|---|
| RIP Summary area | Shows the current configuration of RIP on the device. |
| Static metric | Shows the static metric configuration. "Not defined" means the route map has not been distributed. |
| OSPF metric | Shows what OSPF route map has been applied. |
| Neighbor Filter Table area | |
| Index | The filter number. You assign this number when you configure the filter. |
| Action | The action the device takes for RIP route packets to or from the specified neighbor: |
| deny - If the filter is applied to an interface’s outbound filter group, the filter prevents the device from advertising RIP routes to the specified neighbor on that interface. If the filter is applied to an interface’s inbound filter group, the filter prevents the device from receiving RIP updates from the specified neighbor. | |
| permit - If the filter is applied to an interface’s outbound filter group, the filter allows the device to advertise RIP routes to the specified neighbor on that interface. If the filter is applied to an interface’s inbound filter group, the filter allows the device to receive RIP updates from the specified neighbor. | |
| Neighbor IP Address | The IP address of the RIP neighbor. |
Examples
The following example shows the current configuration of RIP on a device with a neighbor filter table configured to deny routes from source IP address 10.11.222.25.
device# show ip rip
RIP Summary
Default port 520
Administrative distance is 120
Updates every 30 seconds, expire after 180
Holddown lasts 180 seconds, garbage collect after 120
Last broadcast 29, Next Update 27
Need trigger update 0, Next trigger broadcast 1
Minimum update interval 25, Max update Offset 5
Split horizon is on; poison reverse is off
Import metric 1
Prefix List, Inbound : block_223
Prefix List, Outbound : block_223
Route-map, Inbound : Not set
Route-map, Outbound : Not set
Redistribute: CONNECTED Metric : 0 Routemap : Not Set
RIP Neighbor Filter Table
Index Action Neighbor IP Address
1 deny 10.11.222.55
5 permit any