interface cpu active

Enters configuration mode for the CPU of the active unit, either the active controller of a stack or a standalone unit.
Syntax
interface cpu active
Modes

Global configuration mode

Examples

The following example enters CPU interface configuration mode for the active controller. It then applies an IPv4 ACL to inbound CPU traffic. 

device# configure terminal
device(config)# interface cpu active
device(config-if-cpu-active)# ip access-group acl1 in
(config-if-cpu-active)# exit
device(config)#

The following example applies an IPv6 ACL to inbound CPU traffic. 

device# configure terminal
device(config)# interface cpu active
(config-if-cpu-active)# ipv6 access-group aclv61 in
(config-if-cpu-active)# exit
device(config)#
History
Release version Command history
09.0.00 This command was introduced.
Parent topic: Commands I