local-identifier
Configures the local system identifier for an Internet Key Exchange version 2 (IKEv2)
profile.
Syntax
local-identifier
{
address
{
ip-address
|
ipv6-address
}
|
dn
dn-name
|
email
email-address
|
fqdn
fqdn-name
|
key-id
key-id
}
no local-identifier
{
address
{
ip-address
|
ipv6-address
}
|
dn
dn-name
|
email
email-address
|
fqdn
fqdn-name
|
key-id
key-id
}
Command Default
The device IP address is used as the local identifier.
Parameters
Modes
IKEv2 profile configuration mode
Usage Guidelines
The
no form of the command removes the specified local identifier.
Examples
The following example shows how to configure IP address 10.3.3.3 as the local system identifier for an IKEv2 profile named prof_mktg.
device# configure terminal device(config)# ikev2 profile prof-mktg device(config-ike-profile-prof-mktg)# local-identifier address 10.3.3.3 device(config-ike-profile-prof-mktg)# exit
History
| Release version | Command history |
|---|---|
| 08.0.50 | This command was introduced. |
| 08.0.70 | Support was added for IPv6. |