`copy flash tftp`

Copies contents from ICX device flash memory to a TFTP server.

Syntax

copy flash tftp { ipv4-address | ipv6-address } filename { file | primary | secondary }

Parameters

ipv4-address: Specifies the IPv4 address of the TFTP server.
ipv6-address: Specifies the IPv6 address of the TFTP server.
filename: Specifies the name of the file that must be copied from the flash memory to the TFTP server.
file: Copies a file from flash memory to the TFTP server.
primary: Copies the primary code image to the TFTP server.
secondary: Copies the secondary code image to the TFTP server.

Modes

Privileged EXEC mode

Examples

The following example copies the startup-configuration file from ICX flash memory to the TFTP server at the specified IPv4 address.

device# copy flash tftp 10.176.6.93 startup-config.txt  file
Parameter Validation Successful
....File Upload Complete

The following example copies the image in primary flash to the filename primary.bin on the TFTP server with the IP address 10.176.6.93.

device# copy flash tftp  10.176.6.93 primary.bin primary
Parameter Validation Successful
..........................File Upload Complete

copy flash tftp