neighbor capability orf prefixlist

Advertises outbound route filter (ORF) capabilities to peer routers.
Syntax
neighbor { ip_address | ipv6_address | peer-group-name } capability orf prefixlist [ receive | send ]
no neighbor { ip_address | ipv6_address | peer-group-name } capability orf prefixlist [ receive | send ]
Command Default

ORF capabilities are not advertised to a peer device.

Parameters
ip_address
Specifies the IPv4 address of the neighbor.
ipv6_address
Specifies the IPv6 address of the neighbor.
peer-group-name
Specifies a peer group.
receive
Enables the ORF prefix list capability in receive mode.
send
Enables the ORF prefix list capability in send mode.
Modes

BGP configuration mode

BGP address-family IPv6 unicast configuration mode

BGP address-family IPv4 unicast VRF configuration mode

BGP address-family IPv6 unicast VRF configuration mode

Usage Guidelines

When this command is entered in BGP global configuration mode, it applies only to the IPv4 address family. Use this command in BGP address-family IPv6 unicast configuration mode for BGP4+ configurations.

The no form of the command disables ORF capabilities.

Examples

The following example advertises the ORF send capability to a neighbor with the IP address 10.11.12.13. 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# neighbor 10.11.12.13 capability orf prefixlist send

The following example advertises the ORF receive capability to a neighbor with the IPv6 address 2001:2018:8192::125. 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv6 unicast
device(config-bgp-ipv6u)# neighbor 2001:2018:8192::125 capability orf prefixlist receive
History
Release version Command history
08.0.30 Support was added for the BGP address-family IPv6 unicast VRF configuration mode.
Parent topic: Commands N