show stack zero-touch status
Displays status information for stack zero-touch provisioning or interactive-setup.
Modes
Privileged EXEC mode
Usage Guidelines
If a unit cannot be discovered by stack interactive-setup or zero-touch provisioning, this command shows the reason. It also shows the current status of zero-touch provisioning while it is in progress.
Examples
The following example displays output for the
show stack zero-touch status command.
device# show stack zero-touch status I cannot be discovered by stack zero-touch or interactive-setup option 2. reason: has stack enable configuration I can be discovered by stack interactive-setup option 3. Will clean up in 89.4 sec. Sent last keep-alive 581.1 sec ago. zero-touch-enable and stack enable are configured. Have done 1 probes ZTP has converted 0 new units to members. *** ZTP is going on for 0m0s. state=start. Will trigger again 3 min after done ZTP postponed due to topology changes: 0 My MAC used in image copy is 748e.f8f9.636e. ACL #=0, ind=0
History
| Release version | Command history |
|---|---|
| 08.0.90 | This command was introduced. |