show eee-statistics ethernet

Displays the Energy Efficient Ethernet statistics on a specific interface.
Syntax
show eee-statistics ethernetstackid/slot/port
Modes

Global configuration mode

Usage Guidelines

Use this command to display the energy efficient statistics for a slot or interface.

Note that for the ICX 7550, whenever the speed is changed on a EEE-enabled multi-gigabit port, the clear eee-statistics command must be executed before displaying EEE statistics using the show eee-statistics ethernet command.

The show eee-statistics ethernet command displays the following information:

Output field Description
Port The port number.
EEE-State Displays if Energy Efficient Ethernet is enabled or disabled. If disabled then all the counters will be 0. If EEE is enabled, then these counters will be updated.
TXEventCount TX EEE Low Power Idle (LPI) event counter. This counter specifies the number of times the LPI mode has been enforced by EEE on Transmit side.
TXDuration The total time from the first LPI (Low Power Idle) signal transmission. This is an LPI event duration counter on the transmit path which gets updated if the port is in LPI mode.
RXEventCount The LPI signal reception count. This counter specifies the number of times the LPI mode has been enforced by EEE on the receive side.
RXDuration Total time from the first LPI signal reception. This is an LPI event duration counter on the receive path which gets updated if the port is in LPI mode.
Examples

The following example displays energy efficient statistics on a specific interface. 

device(config)# show eee-statistics ethernet 1/1/4

Port      EEE-State       TXEventCount       TXDuration        RXEventCount        RXDuration
1/1/4      Enable           17                 2545628             16                50953524
History
Release version Command history
08.0.30 This command was introduced.
Parent topic: Show Commands