`ipv6 ospf authentication key-activation-wait-time`

Configures the time before an authentication key change is activated for an Open Shortest Path First version 3 (OSPFv3) interface.

Syntax

ipv6 ospf authentication key-activation-wait-time wait-time

no ipv6 ospf authentication key-activation-wait-time wait-time

Parameters

wait-time: Specifies the time before an authentication key change takes place. The wait time can be set from 0 through 14400 seconds.

Modes

Interface subtype configuration mode

Usage Guidelines

Use this command to set or reset the wait time before an authentication key change takes place on the interface to which you are connected.

The no form of the command resets the wait time to the default of 300 seconds.

Examples

The following example sets the wait time before an authentication key change to 600 seconds on the OSPFv3 interface.

device# configure terminal
device(config)# interface ve 1
device(config-vif-1)# ipv6 ospf authentication key-activation-wait-time 600

History

Release	Command History
08.0.70	This command was introduced.

ipv6 ospf authentication key-activation-wait-time