lldp reinit-delay

Configures the minimum time between port reinitializations.
Syntax
lldp reinit-delay seconds
no lldp reinit-delay
Command Default

When LLDP is enabled, the default time between port reinitializations is set to 2 seconds.

Parameters
seconds
Specifies the time between port reinitializations. The value can range from 1 through 10 seconds. The default is 2 seconds.
Modes

Global configuration mode

Usage Guidelines

The LLDP re-initialization delay timer specifies the minimum number of seconds the device will wait from when LLDP is disabled on a port, until it will honor a request to re-enable LLDP on that port.

The no form of the command removes the configured value and restores the interval between port reinitializations to the default of 2 seconds.

Examples

The following example sets the reinitialization delay timer to 5 seconds. 

device(config)# lldp reinit-delay 5
Parent topic: Commands J, K, and L