neighbor advertisement-interval

Enables changes to the interval over which a specified neighbor or peer group holds route updates before forwarding them.
Syntax
neighbor { ip-address | ipv6-address | peer-group-name } advertisement-interval seconds
no neighbor { ip-address | ipv6-address | peer-group-name } advertisement-interval
Parameters
ip-address
IPv4 address of the neighbor.
ipv6-address
IPv6 address of the neighbor.
peer-group-name
Peer group name configured by the neighbor peer-group-name command.
seconds
Range is from 0 through 3600. The default is 0.
Modes

BGP configuration mode

BGP address-family IPv4 unicast VRF configuration mode

BGP address-family IPv6 unicast VRF configuration mode

Usage Guidelines

The no form of the command restores the default interval.

Examples

The following example changes the BGP4 advertisement interval from the default to 60 seconds. 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# neighbor 10.11.12.13 advertisement-interval 60

The following example changes the BGP4+ advertisement interval from the default for VRF instance "red". 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv6 unicast vrf red
device(config-bgp-ipv6u-vrf)# neighbor 2001:2018:8192::125 advertisement-interval 60
History
Release version Command history
08.0.30 Support was added for the BGP address-family IPv6 unicast VRF configuration mode.
Parent topic: Commands N