enable (VSRP)

Enables the VSRP VRID for a port-based VLAN.
Syntax
enable
disable
Command Default

The VSRP VRID is disabled by default.

Modes

VSRP VRID configuration mode

Usage Guidelines

The device must be set as a backup. Because VSRP does not have an owner, all VSRP devices are backups. The active device for a VRID is elected based on the VRID priority.

The disable command deactivates VSRP.

Examples

The following example shows how to enable the VSRP VRID on a VLAN. 

device(config)# vlan 200
device(config-vlan-200)# tagged ethernet 1/1/1 to 1/1/8
device(config-vlan-200)# vsrp vrid 1
device(config-vlan-200-vrid-1)# backup
device(config-vlan-200-vrid-1)# enable
Parent topic: Commands D through H