ocsp (PKI)
Sets the HTTP method for the Online Certificate Status Protocol (OCSP) request.
Command Default
By default, an HTTP "get" command is used for OCSP requests.
Parameters
Modes
PKI trustpoint configuration sub-mode
Usage Guidelines
The no form of the command removes the configuration.
By default, an HTTP "get" command is used to reach the OCSP responder. The HTTP "get"
method can be changed to an HTTP post using the command
ocsp http post. The command is typically configured for the Linux operating system.
Examples
The following example configures trustpoint abcd to use the HTTP post method for OCSP requests.
device# configure terminal device(config)# pki trustpoint abcd device(config-pki-trustpoint-abcd)# ocsp http post device(config-pki-trustpoint-abcd)# revocation-check ocsp device(config-pki-trustpoint-abcd)# ocsp-url http://15.1.1.1:2560 device(config-pki-trustpoint-abcd)# fingerprint 3C:EA:EC:E6:F1:DD:3B:86:65:DE:58:F4:A2:75:D8:63:6D:23:68:40 device(config-pki-trustpoint-abcd)# exit device(config)#
History
| Release version | Command history |
|---|---|
| 08.0.70 | This command was introduced. |