lldp transmit-hold
Configures the transmit holdtime multiplier for time to live (TTL).
Command Default
When LLDP is enabled, the device automatically sets the holdtime multiplier for TTL to 4.
Parameters
Modes
Global configuration mode
Usage Guidelines
The transmit holdtime multiplier for TTL is used to compute the actual TTL value used in an Link Layer Discovery Protocol (LLDP) frame. The TTL value is the length of time for which the receiving device maintains information in its MIB.
Note: Setting the transmit interval or transmit holdtime multiplier, or both, to inappropriate
values can cause the LLDP agent to transmit LLDP PDUs with TTL values that are excessively
high. This, in turn, can affect how long a receiving device retains information if
it is not refreshed.
The
no form of the command removes the configured value and restores the holdtime multiplier
for TTL to the default value 4.