show license

Displays information about Self Authenticated Upgrade licenses installed on a device.
Syntax
show license
Modes

Privileged EXEC mode

Usage Guidelines
Note: ICX 7150-ES and ICX 8100 devices do not support license commands.

The command can be used on a standalone device or on the active controller for a stack.

This command does not display information about XML licenses that were installed on the device in FastIron 08.0.70 or earlier releases.

The show license command displays the following information:

Output field Description
Unit Unit number assigned in the stack. For standalone units, the unit number is 1.
License Name Name of Software Authenticated Upgrade (SAU) license installed.
L3 Premium (Yes, No) Indicates whether Layer 3 features are enabled by the license.
Port Speed Upgrade (Yes, No) Indicates whether the license allows ports to be upgraded from the default speed (1 Gbps).
Speed Speed to which ports covered by the license can be upgraded (10 Gbps).
Ports Indicates the number of ports covered by the license.
MACsec Indicates whether a MACsec license is installed.
Examples

The following example shows a 2x10G license installed on stack unit 1. Stack unit 2 has 8x10G and Layer 3 Premium licenses. 

device# show license installed
Unit  License Name      L3 Premium  Port Speed Upgrade Speed    Ports   MACsec  
1      L3-PREM-2X10G    Yes         Yes                10G      2       NA         
2      L3-PREM-8x10G    Yes         Yes                10G      8       NA
History
Release version Command history
08.0.80 This command was enhanced to support all ICX platforms that support SAU licensing.
08.0.61 This command was introduced.
Parent topic: Show Commands