rspan source
Configures a Remote Switched Port Analyzer (RSPAN) source port and properties for
port mirroring.
Syntax
rspan source
{
monitor-both
|
monitor-in
|
monitor-out
}
{
ethernet
unit/slot/port
|
lag
lag-id
}
no rspan source
{
monitor-both
|
monitor-in
|
monitor-out
}
{
ethernet
unit/slot/port
|
lag
lag-id
}
Command Default
No RSPAN source port is configured.
Parameters
Modes
RSPAN configuration mode
Usage Guidelines
The configured VLAN must not be a user VLAN. This command can be successfully executed only if an RSPAN destination port is configured. RSPAN must be configured on all the switches participating in the RSPAN session.
The
no form of the command deletes the port mirroring source port for the specified interface.
Examples
The following example configures an Ethernet interface as an RSPAN source port and specifies that ingress traffic is monitored for a device.
device# configure terminal device(config)# rspan-vlan 4000 device(config-rspan-vlan)# tagged ethernet 1/1/2 device(config-rspan-vlan)# rspan source monitor-in ethernet 1/1/1
History
| Release version | Command history |
|---|---|
| 08.0.80 | This command was introduced. |