`ipv6 multicast-boundary`

Defines multicast boundaries for PIM-enabled interfaces.

Syntax

ipv6 multicast-boundary acl-spec

no ipv6 multicast-boundary acl-spec

Command Default

Boundaries are not defined.

Parameters

acl-spec: Specifies the number or name identifying an access control list (ACL) that controls the range of group addresses affected by the boundary.

Modes

Interface configuration mode

Usage Guidelines

The no form of this command removes the boundary on a PIM-enabled interface.

You can use standard ACL syntax to configure an access list.

Examples

This example defines a boundary named MyAccessList for a PIM-enabled interface.

Device(config)# interface ethernet 1/2/2
Device(config-if-e1000-1/2)#ipv6 multicast-boundary MyAccessList

ipv6 multicast-boundary