`cluster`

Configures a Multi-Chassis Trunking (MCT) cluster.

Syntax

cluster [ cluster-name ] cluster-id

no cluster [ cluster-name ] cluster-id

Command Default

An MCT cluster is not configured.

Parameters

cluster-name: Specifies the cluster name as an ASCII string. The cluster name can be up to 64 characters in length.
cluster-id: Specifies the cluster ID. The ID value range can be from 1 through 4095.

Modes

Global configuration mode

Usage Guidelines

The cluster-name variable is optional; the device auto-generates cluster-name as CLUSTER-X when only the cluster ID is specified.

Note: The cluster-id variable must be the same on both cluster devices.

The no form of the command removes the MCT cluster configuration.

Examples

The following example configures an MCT cluster.

device(config)# cluster SX 4000
device(config-cluster-SX)# rbridge-id 3

cluster